Rode

4 products

  • RODE LPA1 Price in Pakistan - Lens Ground

    RODE RODE LPA1

    RODE LPA1 Key Specifications Low profile studio arm for microphones, cameras, lights and more Sits below a camera's line of sight, ideal for video podcasts, gaming and streaming 750mm horizontal reach with 90° up and 60° down vertical adjustment 360 degree articulation with a ball mount for precise positioning Supports devices up to 2kg 1/4 inch UNC, 3/8 inch UNC and 5/8 inch UNS thread compatibility Heavy all metal construction Integrated cable management with four cable clips Desk clamp for desks up to 70mm thick Product Description RODE LPA1 is a low profile studio arm for audio recording, live streaming and podcasting in the studio or at home. It holds your microphone close for broadcast quality sound while staying below a camera's typical line of sight. In the zone, out of frame The low profile design stays below a camera's typical line of sight, so your microphone does its job without dominating the frame. It is ideal for video podcasts, streams and any setup where the picture matters as much as the sound. Go low, sound pro With 750mm of horizontal reach, full 360 degree articulation and a precision ball head mount, the LPA1 places your microphone exactly where it sounds best. Every movement is smooth and silent, so you can reposition it during a recording. Clean lines by design The arm routes your XLR or USB cable along its length and secures it with four included clips, so nothing dangles or drifts into the picture. Highest load capacity of any RODE studio arm Made from metal, the LPA1 supports microphones and accessories up to 2kg. The included clamp mounts to desks up to 70mm thick with no drilling, and 1/4 inch, 3/8 inch and 5/8 inch threads take almost any mic, camera or light. Technical Specifications Brand RODE Model LPA1 Type Low profile studio arm Weight 1650g Length 750mm extended, 367mm folded Width 75mm Folded Height 150mm Maximum Reach 750mm extended horizontal Highest Reach 525mm extended above desk Lowest Reach 200mm extended below desk Vertical Adjustment 90° up, 60° down Load Capacity Up to 2kg Thread Compatibility 1/4 inch UNC, 3/8 inch UNC and 5/8 inch UNS Desk Clamp Desks up to 70mm thick Construction All metal In the Box 1 x LPA1 (Black) 1 x Desk Clamp (Black) 1 x 3/8 to 1/4 inch Adaptor 1 x 3/8 to 5/8 inch Adaptor 4 x Cable Clip Frequently Asked Questions How much weight can the LPA1 hold? It supports microphones and accessories up to 2kg, the highest capacity of any RODE studio arm. Will it block my camera shot? No. Its low profile design is made to sit below a camera's typical line of sight. How does it mount to my desk? The included clamp fits desks up to 70mm thick with no drilling. Which mounts does it support? It has 1/4 inch UNC, 3/8 inch UNC and 5/8 inch UNS thread compatibility, with adaptors in the box.

    Price on WhatsApp

  • RODE Wireless GO II Price in Pakistan - Lens Ground

    RODE RODE Wireless GO II

    RODE Wireless GO II Key Specifications Dual channel wireless mic system: 2 transmitters + 1 receiver Built in omnidirectional mic in each transmitter 3.5mm TRS lavalier input on each transmitter Series IV 2.4GHz digital transmission, 128 bit encryption Up to 200 m line of sight range On board recording, over 40 hours of internal memory 3.5mm TRS analog output, USB C and iOS digital output Up to 7 hours battery life Transmitter 30 g, receiver 32 g   Product Description RODE Wireless GO II is RØDE's compact dual channel wireless microphone system with two clip on transmitters and one receiver. It lets you record two people at the same time, which makes it a popular choice for interviews, vlogs, podcasts and video content. Two mics in your pocket Each transmitter has a built in omnidirectional microphone, so you can simply clip it on and record. For a more discreet look, plug a lavalier mic into the 3.5mm input on the transmitter. Reliable wireless signal Audio travels over RØDE's Series IV 2.4GHz digital transmission with 128 bit encryption, with a range of up to 200 m line of sight. Each transmitter can also record on board, with over 40 hours of internal memory, as a backup if the wireless signal drops. Connect to cameras, phones and computers The receiver connects to cameras through its 3.5mm TRS output, and to phones, tablets and computers through USB C digital audio, including iOS devices. You can record the two channels merged or separately, in mono or stereo. Battery and app The built in battery lasts up to 7 hours. The free RØDE Central app lets you change settings, export on board recordings and update firmware. Compatibility DSLR and mirrorless cameras (3.5mm), iOS and Android phones and tablets, and Mac and Windows computers (USB C). It also works with RØDE Series IV devices such as Wireless ME, Wireless PRO, RØDECaster Duo, RØDECaster Pro II and Streamer X. Technical Specifications Model RØDE Wireless GO II (dual channel) System 2 transmitters + 1 receiver Microphone Type Pre polarised pressure transducer, built into each transmitter Polar Pattern Omnidirectional Frequency Range 50 Hz to 20 kHz Wireless Series IV 2.4GHz digital transmission, 128 bit encryption Range Up to 200 m (line of sight) Transmitter Input 3.5mm TRS (lavalier mic input) Receiver Outputs 3.5mm TRS analog, USB C digital (iOS compatible) Output Modes Mono or stereo (switchable) On board Recording Over 40 hours of internal memory Battery Built in rechargeable lithium ion, up to 7 hours Charging USB, 5V 0.3A Transmitter Size and Weight 44 × 45.3 × 18.3 mm, 30 g Receiver Size and Weight 44 × 45.5 × 18.3 mm, 32 g App Support RØDE Central and RØDE Connect In the Box Wireless GO II receiver × 1 Wireless GO II transmitter × 2 SC20 USB C to USB A cable × 3 SC5 3.5mm TRS cable × 1 Furry windshield × 3 Carry pouch × 1 Available Configurations RODE Wireless GO II (dual channel: 2 transmitters + 1 receiver) Frequently asked questions Is this the Wireless GO II or the Wireless GO (Gen 3)? This is the Wireless GO II, RØDE's dual channel system with two transmitters and one receiver, a 200 m range, on board recording and up to 7 hours of battery life. Can I use the RODE Wireless GO II with my phone? Yes. The receiver has a USB C digital output that works with Android and iOS phones and tablets. A phone cable is not in the box, so use a USB C to USB C cable for USB C phones or a USB C to Lightning cable for Lightning iPhones. Cameras connect through the 3.5mm TRS output using the included SC5 cable. What is in the box? One receiver, two transmitters, three SC20 USB C to USB A cables, one SC5 3.5mm TRS cable, three furry windshields and a carry pouch. Is the RODE Wireless GO II at Lens Ground genuine? Yes. Every product sold by Lens Ground is 100% genuine.

    Price on WhatsApp

  • RODE Wireless GO Price in Pakistan - Lens Ground

    RODE RODE Wireless GO

    RODE Wireless GO Key Specifications Compact wireless microphone system: 1 transmitter + 1 receiver Built in omnidirectional condenser microphone in the clip on transmitter 2.4 GHz digital transmission with 128 bit encryption Range up to 70 m (line of sight) 3.5mm TRS lavalier input on the transmitter 3.5mm TRS output on the receiver for cameras Up to 7 hours battery life, USB C charging Only 31 g per unit Product Description RODE Wireless GO is the original compact wireless microphone system from RØDE. A tiny clip on transmitter with a built in microphone sends clear audio to a receiver on your camera, so you can record vlogs, interviews and pieces to camera without cables. Ultra compact and simple The transmitter and receiver weigh just 31 g each. Clip the transmitter to clothing and the receiver to your camera's cold shoe, and they pair automatically when switched on. Built in mic or lavalier The transmitter has a built in omnidirectional microphone, and a 3.5mm TRS input lets you connect a lavalier microphone for a more discreet look. Reliable wireless audio 2.4 GHz digital transmission with 128 bit encryption gives a stable signal at up to 70 m line of sight, with up to 7 hours of battery life on a single charge. Works with cameras and phones The receiver connects to cameras with the supplied 3.5mm TRS cable, and to phones with the correct TRS to TRRS cable or adapter. Technical Specifications Brand RØDE Model Wireless GO (1st generation) System 1 transmitter + 1 receiver Acoustic Principle Pre polarised pressure transducer Polar Pattern Omnidirectional Frequency Range 50 Hz to 20 kHz (external mic input 20 Hz to 20 kHz) Equivalent Input Noise 21.8 dB (A weighted) at maximum gain Maximum SPL 100 dB SPL (1 kHz @ 1 m) Dynamic Range 100 dBA Maximum Output Level +3 dBu Analog Input 3.5mm TRS lavalier input (transmitter) Analog Output 3.5mm TRS (receiver) Wireless 2.4 GHz digital, 128 bit encryption Range Up to 70 m (line of sight) Latency 6 ms Battery Built in rechargeable Li po, up to 7 hours; USB C charging Weight Transmitter 31 g; receiver 31 g Dimensions TX 44 × 45.3 × 18.5 mm; RX 44 × 46.4 × 18.5 mm In the Box Wireless GO transmitter × 1 Wireless GO receiver × 1 SC2 3.5mm TRS cable × 1 USB A to USB C cable × 2 Fur windshield × 2 Pouch × 1 Available Configurations RODE Wireless GO (1 transmitter + 1 receiver) Frequently asked questions Is this the same as the Wireless GO (Gen 3)? No. This is the original Wireless GO with one transmitter and one receiver. The Wireless GO (Gen 3) is a newer, separate model with two transmitters, 32 bit float on board recording and USB C digital output. Can I connect it to my phone? Yes. The receiver connects to a phone's 3.5mm TRRS input or a phone adapter with a TRS to TRRS cable such as the RØDE SC7. How many Wireless GO sets can I use together? Up to 8 Wireless GO sets can be used at the same time in the same location. Is the RODE Wireless GO at Lens Ground genuine? Yes. Every product sold by Lens Ground is 100% genuine.

    Price on WhatsApp

  • RODE Wireless GO (Gen 3) Price in Pakistan - Lens Ground

    RODE RODE Wireless GO (Gen 3)

    RODE Wireless GO (Gen 3) Key Specifications Dual channel compact wireless microphone system: 2 transmitters + 1 receiver Series IV 2.4 GHz digital transmission with 128 bit encryption Range up to 260 m (line of sight) 32 bit float on board recording in each transmitter Intelligent GainAssist, output gain control and safety channel 3.5mm TRRS analog output and USB C digital output Locking 3.5mm TRS lavalier input on each transmitter Headphone monitoring with level control Up to 7 hours battery life Direct Connect: pair transmitters to an iPhone by Bluetooth with RØDE Capture Product Description RODE Wireless GO (Gen 3) is the third generation of RØDE's best selling compact wireless microphone. It adds 32 bit float on board recording, intelligent GainAssist and improved built in mics, while keeping the simple grab and go operation creators love. Clear, stable wireless audio RØDE's Series IV 2.4 GHz digital transmission with 128 bit encryption and a near zero latency codec gives clear, stable audio at up to 260 m line of sight. Never lose a take Each transmitter records 32 bit float audio on board, so you can recover recordings that were too quiet or even clipped in post production. Great sound automatically Intelligent GainAssist balances levels on the fly, and you can fine tune output gain and use camera presets. The built in mics use the same upgraded capsules and preamps as the Wireless PRO. Cameras, phones and computers Analog and USB C digital outputs connect the receiver to DSLR and mirrorless cameras, iPhone and Android phones, and computers, where it also works as a USB microphone. Professional features Monitor audio with the headphone output, keep lavaliers secure with locking 3.5mm connectors, and save battery with plug in power detect. Configure everything in the free RØDE Central app. Technical Specifications Brand RØDE Model Wireless GO (Gen 3) System 2 transmitters + 1 receiver Acoustic Principle Pre polarised pressure transducer Polar Pattern Omnidirectional Frequency Range 20 Hz to 20 kHz Maximum SPL 123.5 dB SPL Equivalent Noise 22 dBA Signal to Noise Ratio 72 dB Analog Input 3.5mm locking TRS (transmitter) Analog Output 3.5mm TRRS (receiver) Digital Output USB C Wireless Series IV 2.4 GHz, 128 bit encryption Range Up to 260 m (line of sight) On board Recording 32 bit float Battery Built in rechargeable lithium ion, up to 7 hours; USB C charging (5V, 0.4A) App RØDE Central (iOS 14+, Android 11+, macOS 11+, Windows 10+) In the Box Transmitter × 2 Receiver × 1 3.5mm TRS patch cable (red, 20 cm) × 1 USB C cable (black, 30 cm) × 1 USB C multi adaptor × 1 Carry pouch × 1 Furry windshields × 3 Available Configurations RODE Wireless GO (Gen 3), Black (2 transmitters + 1 receiver) Frequently asked questions What is new in the Wireless GO (Gen 3)? It adds 32 bit float on board recording, intelligent GainAssist, improved built in mics, locking lavalier inputs, headphone monitoring and a longer 260 m range compared with the Wireless GO II. Can I use it with my phone? Yes. Connect the receiver by USB C to iPhone or Android phones, or pair the transmitters directly to an iPhone by Bluetooth with the RØDE Capture app. Can I record two people? Yes. It has two transmitters, so you can record two people at the same time. Is the RODE Wireless GO (Gen 3) at Lens Ground genuine? Yes. Every product sold by Lens Ground is 100% genuine.

    Price on WhatsApp

Rode Price in Pakistan

Shop Rode in Pakistan at Lens Ground: the RØDE Wireless GO series of wireless microphone systems for vlogs, interviews, YouTube and online classes. The price list on this page always shows the models we have right now. Where a price is shown, you can order directly on our website with delivery across Pakistan. If a model shows no price, message us on WhatsApp for today's Rode price and stock.

100% genuineOriginal products from leading brands
Free delivery all over PakistanUsually 3 to 5 working days
Easy paymentCash on Delivery, credit/debit card, bank transfer, JazzCash and Easypaisa
Retail storePlot # 28-C, 3rd Floor, Office # 8, Shangani Edifice, South Park Avenue, Phase 2 Ext., DHA, Karachi

Rode Price List in Pakistan (November 2026)

Models with Price on WhatsAppPrices for these models change often. Tap "Ask price" and we will send today's price and stock on WhatsApp.
ModelPrice
RODE Wireless GOAsk price
RODE Wireless GO (Gen 3)Ask price
RODE Wireless GO IIAsk price

Prices are taken live from this page and can change with stock and the exchange rate.

Which Rode should you buy?

  • For wireless audio: Rode Wireless Microphones: the RODE Wireless GO series.
  • For interviews and two-person videos: dual-channel Wireless GO kits with two transmitters.
  • For backup recording: newer Wireless GO models record on board, so you keep audio if the signal drops.
  • To compare other brands: see all Wireless Microphones.

Buying Rode in Pakistan

  • Models with a price on our website can be ordered directly online. After you order, our team will call or WhatsApp you to confirm the exact model and price before delivery.
  • For models without a price, message us directly on WhatsApp. There is no need to place an order on the website for these models.

Related collections

Frequently asked questions

What is the price of Rode in Pakistan?

Prices can change with stock and the exchange rate. Models with a price can be ordered directly on our website, and our team will call or WhatsApp you to confirm your order. For models without a price, message us on WhatsApp at +92 300 2506005 for today's price.

Does Rode Wireless GO work with my phone?

Yes. Newer Wireless GO receivers connect to phones by USB-C, and they connect to cameras with a 3.5 mm cable. Ask us before you order.

Single or dual kit: which should I buy?

Choose a single transmitter for solo videos. Choose a dual kit for interviews and podcasts with two people.

Are Rode products at Lens Ground genuine?

Yes. Every product sold by Lens Ground is 100% genuine.

Do you deliver Rode all over Pakistan?

Yes. Free delivery all over Pakistan. In-stock orders usually arrive within 3 to 5 working days after order confirmation. See our Shipping Policy.

Which payment methods can I use?

Cash on Delivery, credit/debit card, bank transfer, JazzCash and Easypaisa.

Are the products genuine and do they have a warranty?

Every product sold by Lens Ground is 100% genuine. Warranty depends on the product and is confirmed with your order. See our Warranty Terms.

© 2026 Lens Ground