RODE LPA1

Description

RODE LPA1

Key Specifications

  • Low profile studio arm for microphones, cameras, lights and more
  • Sits below a camera's line of sight, ideal for video podcasts, gaming and streaming
  • 750mm horizontal reach with 90° up and 60° down vertical adjustment
  • 360 degree articulation with a ball mount for precise positioning
  • Supports devices up to 2kg
  • 1/4 inch UNC, 3/8 inch UNC and 5/8 inch UNS thread compatibility
  • Heavy all metal construction
  • Integrated cable management with four cable clips
  • Desk clamp for desks up to 70mm thick

Product Description

RODE LPA1 is a low profile studio arm for audio recording, live streaming and podcasting in the studio or at home. It holds your microphone close for broadcast quality sound while staying below a camera's typical line of sight.

In the zone, out of frame

The low profile design stays below a camera's typical line of sight, so your microphone does its job without dominating the frame. It is ideal for video podcasts, streams and any setup where the picture matters as much as the sound.

Go low, sound pro

With 750mm of horizontal reach, full 360 degree articulation and a precision ball head mount, the LPA1 places your microphone exactly where it sounds best. Every movement is smooth and silent, so you can reposition it during a recording.

Clean lines by design

The arm routes your XLR or USB cable along its length and secures it with four included clips, so nothing dangles or drifts into the picture.

Highest load capacity of any RODE studio arm

Made from metal, the LPA1 supports microphones and accessories up to 2kg. The included clamp mounts to desks up to 70mm thick with no drilling, and 1/4 inch, 3/8 inch and 5/8 inch threads take almost any mic, camera or light.

Technical Specifications

Brand RODE
Model LPA1
Type Low profile studio arm
Weight 1650g
Length 750mm extended, 367mm folded
Width 75mm
Folded Height 150mm
Maximum Reach 750mm extended horizontal
Highest Reach 525mm extended above desk
Lowest Reach 200mm extended below desk
Vertical Adjustment 90° up, 60° down
Load Capacity Up to 2kg
Thread Compatibility 1/4 inch UNC, 3/8 inch UNC and 5/8 inch UNS
Desk Clamp Desks up to 70mm thick
Construction All metal

In the Box

  • 1 x LPA1 (Black)
  • 1 x Desk Clamp (Black)
  • 1 x 3/8 to 1/4 inch Adaptor
  • 1 x 3/8 to 5/8 inch Adaptor
  • 4 x Cable Clip

Frequently Asked Questions

How much weight can the LPA1 hold?

It supports microphones and accessories up to 2kg, the highest capacity of any RODE studio arm.

Will it block my camera shot?

No. Its low profile design is made to sit below a camera's typical line of sight.

How does it mount to my desk?

The included clamp fits desks up to 70mm thick with no drilling.

Which mounts does it support?

It has 1/4 inch UNC, 3/8 inch UNC and 5/8 inch UNS thread compatibility, with adaptors in the box.

RODE LPA1

Product form

Price on WhatsApp

WhatsAppfor price
    • Free shipping all over Pakistan
    • Delivery Time : Usually 3 to 5 working days after order confirmation. If the item is out of stock or delayed, we’ll contact you with an update or offer a pre-order option.
    • Payment Options: COD, Credit/Debit Card & Bank Transfer available. After placing your order, simply inform our team of your preferred payment method when we contact you for order confirmation.

    Description

    RODE LPA1

    Key Specifications

    • Low profile studio arm for microphones, cameras, lights and more
    • Sits below a camera's line of sight, ideal for video podcasts, gaming and streaming
    • 750mm horizontal reach with 90° up and 60° down vertical adjustment
    • 360 degree articulation with a ball mount for precise positioning
    • Supports devices up to 2kg
    • 1/4 inch UNC, 3/8 inch UNC and 5/8 inch UNS thread compatibility
    • Heavy all metal construction
    • Integrated cable management with four cable clips
    • Desk clamp for desks up to 70mm thick

    Product Description

    RODE LPA1 is a low profile studio arm for audio recording, live streaming and podcasting in the studio or at home. It holds your microphone close for broadcast quality sound while staying below a camera's typical line of sight.

    In the zone, out of frame

    The low profile design stays below a camera's typical line of sight, so your microphone does its job without dominating the frame. It is ideal for video podcasts, streams and any setup where the picture matters as much as the sound.

    Go low, sound pro

    With 750mm of horizontal reach, full 360 degree articulation and a precision ball head mount, the LPA1 places your microphone exactly where it sounds best. Every movement is smooth and silent, so you can reposition it during a recording.

    Clean lines by design

    The arm routes your XLR or USB cable along its length and secures it with four included clips, so nothing dangles or drifts into the picture.

    Highest load capacity of any RODE studio arm

    Made from metal, the LPA1 supports microphones and accessories up to 2kg. The included clamp mounts to desks up to 70mm thick with no drilling, and 1/4 inch, 3/8 inch and 5/8 inch threads take almost any mic, camera or light.

    Technical Specifications

    Brand RODE
    Model LPA1
    Type Low profile studio arm
    Weight 1650g
    Length 750mm extended, 367mm folded
    Width 75mm
    Folded Height 150mm
    Maximum Reach 750mm extended horizontal
    Highest Reach 525mm extended above desk
    Lowest Reach 200mm extended below desk
    Vertical Adjustment 90° up, 60° down
    Load Capacity Up to 2kg
    Thread Compatibility 1/4 inch UNC, 3/8 inch UNC and 5/8 inch UNS
    Desk Clamp Desks up to 70mm thick
    Construction All metal

    In the Box

    • 1 x LPA1 (Black)
    • 1 x Desk Clamp (Black)
    • 1 x 3/8 to 1/4 inch Adaptor
    • 1 x 3/8 to 5/8 inch Adaptor
    • 4 x Cable Clip

    Frequently Asked Questions

    How much weight can the LPA1 hold?

    It supports microphones and accessories up to 2kg, the highest capacity of any RODE studio arm.

    Will it block my camera shot?

    No. Its low profile design is made to sit below a camera's typical line of sight.

    How does it mount to my desk?

    The included clamp fits desks up to 70mm thick with no drilling.

    Which mounts does it support?

    It has 1/4 inch UNC, 3/8 inch UNC and 5/8 inch UNS thread compatibility, with adaptors in the box.

    When will my order be delivered?

    Delivery: Usually 3–5 working days after order confirmation. If the item is out of stock or delayed, we’ll contact you with an update or offer a pre-order option.

    Can I return my product?

    No Return & Refund Policy: All purchases from Lens Ground are final and non-returnable/non-refundable. We do not accept returns, exchanges, or refunds once an order has been delivered. Customers are advised to carefully verify the product details, specifications, compatibility, and requirements before placing an order.

    I would like to speak with the customer service. How can I get in touch?

    You can contact us anytime through our Contact Us page, available at the top of our homepage. You’ll find our WhatsApp number, phone number, and email address there. You can call or WhatsApp us during our office hours (Monday to Thursday, Saturday: 12:00 PM - 9:00 PM; Friday: 3:00 PM - 9:00 PM; Sunday: Closed). Outside office hours, you can still reach us via WhatsApp or email 24/7, and our team will respond as soon as possible.

    What can I do if my item (or part of it) is damaged?

    If your product or any part is damaged upon delivery, please inform us within 24 hours with clear video/photo proof. We strongly recommend recording a video while receiving and opening the parcel. Once your claim is accepted, the product must be dispatched back to us within the next 24 hours.

    Products you've watched

      Customer Reviews

      No reviews yet. Bought this from Lens Ground? Be the first to share your experience.

      Write a review
      Your rating

      Reviews are checked before they are published. We only publish reviews from customers who bought from Lens Ground.

      © 2026 Lens Ground