Description
RODE Wireless GO
Key Specifications
- Compact wireless microphone system: 1 transmitter + 1 receiver
- Built in omnidirectional condenser microphone in the clip on transmitter
- 2.4 GHz digital transmission with 128 bit encryption
- Range up to 70 m (line of sight)
- 3.5mm TRS lavalier input on the transmitter
- 3.5mm TRS output on the receiver for cameras
- Up to 7 hours battery life, USB C charging
- Only 31 g per unit
Product Description
RODE Wireless GO is the original compact wireless microphone system from RØDE. A tiny clip on transmitter with a built in microphone sends clear audio to a receiver on your camera, so you can record vlogs, interviews and pieces to camera without cables.
Ultra compact and simple
The transmitter and receiver weigh just 31 g each. Clip the transmitter to clothing and the receiver to your camera's cold shoe, and they pair automatically when switched on.
Built in mic or lavalier
The transmitter has a built in omnidirectional microphone, and a 3.5mm TRS input lets you connect a lavalier microphone for a more discreet look.
Reliable wireless audio
2.4 GHz digital transmission with 128 bit encryption gives a stable signal at up to 70 m line of sight, with up to 7 hours of battery life on a single charge.
Works with cameras and phones
The receiver connects to cameras with the supplied 3.5mm TRS cable, and to phones with the correct TRS to TRRS cable or adapter.
Technical Specifications
| Brand |
RØDE |
| Model |
Wireless GO (1st generation) |
| System |
1 transmitter + 1 receiver |
| Acoustic Principle |
Pre polarised pressure transducer |
| Polar Pattern |
Omnidirectional |
| Frequency Range |
50 Hz to 20 kHz (external mic input 20 Hz to 20 kHz) |
| Equivalent Input Noise |
21.8 dB (A weighted) at maximum gain |
| Maximum SPL |
100 dB SPL (1 kHz @ 1 m) |
| Dynamic Range |
100 dBA |
| Maximum Output Level |
+3 dBu |
| Analog Input |
3.5mm TRS lavalier input (transmitter) |
| Analog Output |
3.5mm TRS (receiver) |
| Wireless |
2.4 GHz digital, 128 bit encryption |
| Range |
Up to 70 m (line of sight) |
| Latency |
6 ms |
| Battery |
Built in rechargeable Li po, up to 7 hours; USB C charging |
| Weight |
Transmitter 31 g; receiver 31 g |
| Dimensions |
TX 44 × 45.3 × 18.5 mm; RX 44 × 46.4 × 18.5 mm |
In the Box
- Wireless GO transmitter × 1
- Wireless GO receiver × 1
- SC2 3.5mm TRS cable × 1
- USB A to USB C cable × 2
- Fur windshield × 2
- Pouch × 1
Available Configurations
- RODE Wireless GO (1 transmitter + 1 receiver)
Frequently asked questions
Is this the same as the Wireless GO (Gen 3)?
No. This is the original Wireless GO with one transmitter and one receiver. The Wireless GO (Gen 3) is a newer, separate model with two transmitters, 32 bit float on board recording and USB C digital output.
Can I connect it to my phone?
Yes. The receiver connects to a phone's 3.5mm TRRS input or a phone adapter with a TRS to TRRS cable such as the RØDE SC7.
How many Wireless GO sets can I use together?
Up to 8 Wireless GO sets can be used at the same time in the same location.
Is the RODE Wireless GO at Lens Ground genuine?
Yes. Every product sold by Lens Ground is 100% genuine.