Description
Livox Mid 360S
Key Specifications
- 360°×59° super wide field of view
- Point rate 200,000 points/s
- Range 40 m at 10% reflectivity, 100 m cut off range
- Minimum detection range 10 cm
- 65×65×60 mm, 265 g
- Active anti interference, resistant to strong ambient light
- IEEE 1588-2008 (PTP v2) and GPS time synchronization
- Warranty: 1 Year Official Warranty
Product Description
Livox Mid 360S is a smaller and lighter LiDAR sensor for mobile robots. Built on Livox hybrid solid state technology, it delivers a 360°×59° field of view for comprehensive 3D point cloud data used in advanced robotic planning and decision making.
Reduced Blind Spot
The LiDAR sensor detects objects as close as 10 cm, and its compact size makes zero blind spot coverage easy to achieve.
Active Anti Interference
Mid 360S keeps performing without disruption from multiple LiDAR signals, even ones transmitting in the same frequency band nearby indoors.
Smaller and Lighter
Powerful performance in a compact footprint allows sleek, concealed integration in new mobile robot designs.
360° Super Wide FOV
A 360°×59° field of view provides comprehensive 3D point cloud data. The effective range varies across the vertical field of view.
Resistant to Strong Ambient Light
With a cut off range of up to 100 m, it performs well in both low light indoor and bright outdoor environments.
Technical Specifications
| Field of View |
360° horizontal × 59° vertical |
| Point Rate |
200,000 points/s |
| Detection Range |
40 m at 10% reflectivity (typical, 25°C); 100 m cut off range |
| Minimum Detection Range |
10 cm |
| Dimensions |
65×65×60 mm |
| Weight |
265 g |
| Technology |
Rotating mirror hybrid solid state |
| Scanning |
Non repetitive scanning |
| Time Synchronization |
IEEE 1588-2008 (PTP v2), GPS |
| IMU |
Built in ICM40609; ±4 g accelerometer, ±2000 deg/s gyroscope, 200 Hz output |
| Development |
Livox SDK 2 and Livox ROS Driver 2 |
| Warranty |
1 Year Official Warranty |
In the Box
- Livox Mid 360S ×1
- Lens Cleaning Cloth ×1
- L shaped Hex Key ×1
- Screw Pack ×1
Available Configurations
Our team confirms the exact configuration with your order.
Frequently Asked Questions
Which scanning mode does Mid 360S use?
Mid 360S supports only the non repetitive scanning mode.
Can Mid 360S use the SDK of earlier Livox products?
No. It uses a different communication protocol, so Livox SDK 2 and Livox ROS Driver 2 are needed.
Does it work near other LiDAR sensors?
Yes. Its active anti interference function keeps performance reliable even when other LiDARs transmit in the same band close by.
Can I use cables from older Livox products?
For testing or demonstration without GPS time sync, accessories and cables of Livox Avia, Mid 70, Tele 15 and Horizon can be used; mass production needs custom cables.