Description
DJI Ronin 2
Key Specifications
- Load weight 13.6 kg (reference value)
- Upgraded high torque motors
- Angular vibration range ±0.02°
- Underslung, upright, briefcase, handheld, car mount, aerial and tripod modes
- Dual TB50 battery system, up to 8 hours run time
- Built in display, GPS and Bluetooth
- Power and video signal through slip ring
- DJI Video Transmitter Adapter Mount for DJI Transmission
- Warranty: 1 Year Official Warranty
Product Description
DJI Ronin 2 is a professional 3 axis camera gimbal for cinema cameras. Upgraded high torque motors allow it to support a wider range of cameras, resist high winds and G forces caused when mounted to a car and keep it moving smoothly in flight.
High Torque Motors
DJI specialized gimbal drive motors with encoders carry payloads up to 13.6 kg with an angular vibration range of ±0.02°.
Versatile Operation Modes
Use Ronin 2 in underslung, upright or briefcase mode, handheld, on a car mount, in the air or on a tripod, with 3 axis or Pan Lock axis modes.
Dual Battery System
Two TB50 Intelligent Batteries power the gimbal for up to 8 hours, or 2.5 hours when powering the gimbal, camera and accessories at the same time.
Built In Display and GPS
The built in display, GPS, Bluetooth module and temperature sensors make setup and monitoring easy, while the slip ring carries power and video signal.
Professional Combo 2024
The 2024 combo adds a DJI Video Transmitter Adapter Mount for use with the DJI Transmission system and five types of battery charger power cables. The remote controller is not included.
Technical Specifications
| Operation Modes |
Underslung, upright, briefcase; handheld, car mount, aerial and tripod |
| Axis Modes |
3 axis, Pan Lock |
| Built In Functions |
Independent IMU module, 32 bit ARM processor, gimbal drive motors with encoders, dual battery system, Bluetooth, D-BUS receiver, 2.4/5.8 GHz receiver, temperature sensors, display, GPS, USB C |
| Working Current |
Static 300 mA, dynamic 500 mA, locked motor max 15 A (at 22.8 V) |
| Run Time |
8 hours; 2.5 hours when powering gimbal, camera and accessories |
| Operating Temperature |
-20° to 50° C |
| Weight |
6.3 kg with handle bar, 5.0 kg without |
| Dimensions |
350×416×530 mm without handle bar; 630×416×720 mm with handle bar |
| Camera Tray |
Max depth from center of gravity 250 mm, max height 190 mm, max width 170 mm |
| Accessory Power |
14.4 V ×4 camera cage (combined 8 A), 14.4 V ×2 pan motor (combined 4 A), 14 V ×2 P TAP (8 A) |
| Battery |
TB50 Intelligent Battery 4280 mAh, 22.8 V |
| Connections |
2.4/5.8 GHz remote control, Bluetooth 4.0, USB C |
| Load Weight |
13.6 kg (reference value) |
| Angular Vibration Range |
±0.02° |
| Max Controlled Rotation Speed |
Pan 400°/s, tilt 360°/s, roll 360°/s |
| Mechanical Endpoint Range |
Pan 360° continuous, tilt ±135°, roll ±220° |
| Controlled Rotation Range |
Pan 360° continuous, tilt ±135°, roll ±30° |
| Warranty |
1 Year Official Warranty |
In the Box
- Ronin 2 Gimbal ×1
- Grip ×1
- TB50 Intelligent Battery ×2
- Dual TB50 Battery Mount ×1
- Battery Charger ×1
- Quad Battery Charging Hub ×1
- Battery Charger Power Cable ×6
- Ronin 2 Power Hub ×1
- Camera Top Cross Bar ×1
- Camera Base Plate ×1
- Accessory Mount ×1
- 15mm Rod ×2
- 15mm Focus Rod Mount ×1
- Ronin 2 Universal Mount ×1
- Top Mounting Block ×1
- Motion Block ×1
- Watertight Protective Case ×1
- ARRI Alexa Mini Power Cable ×1
- ARRI Alexa Mini Shutter Control Cable ×1
- RED Power Cable ×1
- RED RCP Control Cable ×1
- Ronin 2 Power Cable ×1
- 2 Pin Power Cable ×1
- DC Power Cable ×1
- Triple P TAP Breakout Box ×1
- SDI IN Cable ×1
- SDI OUT Cable ×1
- USB C Data Cable ×1
- UART to D-BUS Cable ×1
- Hex Tool ×1
- DJI Video Transmitter Adapter Mount ×1
Available Configurations
- Ronin 2 Professional Combo 2024: gimbal, grip, two TB50 batteries, charging hub, mounts, cables and Watertight Protective Case
Our team confirms the exact configuration with your order.
Frequently Asked Questions
What is new in the Ronin 2 Professional Combo 2024?
It adds a DJI Video Transmitter Adapter Mount for the DJI Transmission system and five types of charger power cables; the remote controller is no longer included.
What is the payload of Ronin 2?
The reference load weight is 13.6 kg.
How long does Ronin 2 run?
Up to 8 hours, or 2.5 hours when powering the gimbal, camera and accessories at the same time.
Which batteries does Ronin 2 use?
TB50 Intelligent Batteries (4280 mAh, 22.8 V), also used by Inspire 2 and DJI Ronin 4D.