Description
DJI ROMO 2
Key Specifications
- Robot vacuum and mop with self cleaning base station
- 36,000 Pa suction power
- Obstacle sensing with 3D ToF LiDAR and two fisheye vision sensors, detects cables as thin as 2 mm
- Robotic arm with built in LiDAR and a 123° swing range for edges and corners
- Robot legs climb single steps up to 4 cm and double steps up to 8.5 cm
- Up to 365 days of maintenance free operation
- 80 °C mop washing and 60 °C mop drying
- Up to 85% noise reduction, 38 dBA in quiet mopping
- 5000 mAh battery, 55 W fast charging (full in 2.5 hours)
- Matter support for Apple Home, Google Home, Alexa, SmartThings and Home Assistant
- Models: ROMO P2 (transparent base station) and ROMO A2 (white base station)
- Warranty: 1 Year Official Warranty
Product Description
DJI ROMO 2 is a robot vacuum and mop built on the sensing and mechatronics technology of DJI drones. It uses AI to adapt its cleaning to each situation, combining 36,000 Pa suction, millimeter level obstacle sensing, a LiDAR guided robotic arm for edges and robot legs that climb steps of up to 8.5 cm, with a base station designed for up to 365 days of maintenance free operation.
AI Cleaning for Every Scenario
ROMO 2 recognizes everyday situations and reacts on its own. It raises suction on carpets, slows down and reduces side brush speed around easily scattered dirt such as cat litter, cleans spilled liquids separately with its robotic arm so the robot stays clean, and switches to Vacuum Then Mop when it detects heavy dust.
Precise Edge Cleaning
The robotic arm has a built in high precision LiDAR that finds exactly where deep cleaning is needed. With an ultra wide 123° swing range it reaches 7.8 cm further and mops 4.5 cm deeper under furniture than the previous generation, around chair legs and into right angled corners.
36,000 Pa Suction
On carpets the pressure plate lowers to partially seal against the floor, enabling 36,000 Pa suction that removes deep seated dust in a single pass. Mop pads lift automatically in vacuum only mode or on carpets, and the roller brushes lift in mop only mode.
Next Generation Self Cleaning
Four high pressure jets clean the surface and edges of the nanocrystalline washboard, and a 16 mm waste suction port removes dirty water, hair and large debris. The base station washes the mop pads at 80 °C, dries them at 60 °C and supports cleaning solution, for up to 365 days of maintenance free operation. ROMO P2 also supports floor deodorizer and a UV light for the dust bag.
Quiet and Tangle Free
32 sound reducing materials, sound insulation mats and muffler chambers reduce noise energy by up to 85%, and quiet mopping runs at only 38 dBA. The DualSweep design pairs two side brushes with 120° angled bristles and the roller brushes to keep hair under control.
Millimeter Level Obstacle Sensing
3D ToF LiDAR sensors work with two fisheye vision sensors to detect obstacles precisely, including cables as thin as 2 mm, dark charging cables in low light and transparent objects such as glass doors and vases. A top collision sensor helps in low clearance areas, and a dust detection light illuminates up to 2,000 cm² of floor.
Smart Home Ready
Full Matter support connects ROMO 2 with Apple Home, Google Home, Alexa, SmartThings and Home Assistant. The DJI Home app adds a dirt map and map editing, and the built in camera lets you check on your home and talk to family or pets, protected by two factor authentication, end to end encryption and a local data mode.
Technical Specifications
| Product Type |
Robot vacuum and mop with base station |
| Models |
ROMO P2, ROMO A2 |
| Robot Dimensions (W x D x H) |
351 x 351 x 98 mm |
| Robot Weight |
4.9 kg |
| Robot Design |
Transparent |
| Suction |
36,000 Pa |
| Dust Box Volume |
215 mL |
| Battery |
5000 mAh, 72 Wh, 14.4 V |
| Runtime |
Up to 3 hours (vacuum only, quiet mode) |
| Charging |
55 W, about 2.5 hours from 0 to 100% |
| Obstacle Climbing |
Single steps up to 4 cm, double steps up to 8.5 cm |
| WiFi / Bluetooth |
802.11b/g/n, 802.11a/n/ac / Bluetooth 5.0 |
| Base Station Design |
ROMO P2: Transparent; ROMO A2: White |
| Base Station Dimensions (W x D x H) |
425 x 453 x 440 mm |
| Base Station Weight |
10 kg |
| Water Tanks |
Clean water tank 4 L, dirty water tank 3.2 L |
| Dust Bag Volume |
2.4 L |
| Cleaning Solution |
Supported (ROMO P2 and ROMO A2) |
| Floor Deodorizer |
ROMO P2 only |
| UV Light for Dust Bag |
ROMO P2 only |
| Base Station Input |
220 to 240 V, 50 to 60 Hz |
| Base Station Rated Power |
Charging 55 W; drying and charging 110 W; dust collection 635 W; hot water self cleaning 1100 W |
| Operating Temperature |
0 to 40 °C |
| App |
DJI Home app, Matter support |
| Warranty |
1 Year Official Warranty |
In the Box
- ROMO P2 or ROMO A2 Robot x 1 (as selected)
- Matching Standard Base Station, Water Tank Version x 1 (as selected)
- ROMO P2 Clean More Combo: ROMO P2 Robot and Base Station plus extra ROMO cleaning accessories
Available Configurations
- ROMO P2 (Water Tank Version)
- ROMO A2 (Water Tank Version)
- ROMO P2 Clean More Combo (Water Tank Version)
Our team confirms the exact configuration with your order.
Frequently Asked Questions
What is the difference between ROMO P2 and ROMO A2?
Both robots have the same transparent design, 36,000 Pa suction and sensing. ROMO P2 comes with a transparent base station that also supports floor deodorizer and a UV light for the dust bag, while ROMO A2 comes with a white base station without those two features.
What is the Water Tank Version?
The base station uses a 4 L clean water tank and a 3.2 L dirty water tank that you fill and empty yourself, so no plumbing connection is needed.
Can DJI ROMO 2 climb thresholds?
Yes. Its robot legs climb single steps up to 4 cm and double steps up to 8.5 cm.
Does DJI ROMO 2 work with smart home systems?
Yes. It supports Matter and works with Apple Home, Google Home, Alexa, SmartThings and Home Assistant, as well as the DJI Home app.