Description
DJI D RTK 2 Mobile Station
Key Specifications
- High precision GNSS RTK station for centimeter level drone positioning
- GNSS: GPS, BeiDou, GLONASS and Galileo
- RTK accuracy: 1 cm + 1 ppm horizontal, 2 cm + 1 ppm vertical (RMS)
- Data links: OcuSync, WiFi, LAN and 4G
- Up to 5 remote controllers with DJI Agras, Phantom 4 RTK or P4 Multispectral
- Built in IMU for movement monitoring, tilt measurement and electronic bubble level
- IP65 protection, lightweight carbon fiber body, -20° to 55° C operating temperature
- Battery: 4920 mAh, 37.3 Wh; run time over 2 h (WB37 battery)
Product Description
DJI D RTK 2 Mobile Station is an upgraded high precision GNSS receiver and RTK station that supports all major global satellite navigation systems, providing real time differential corrections that give drones centimeter level positioning for improved relative accuracy.
Centimeter Level Positioning
The D RTK 2 Mobile Station supports GPS, GLONASS, BeiDou and Galileo signals. It is quick to set up and its built in high gain antenna receives signals from more satellites, even when obstructions are present.
Stay Connected for Any Mission
Communication over 4G, OcuSync, WiFi and LAN keeps data transmission stable. Up to 5 remote controllers can connect at the same time with DJI Agras drones, the Phantom 4 RTK or the P4 Multispectral, and with the Matrice 300 RTK it can connect to multiple aircraft.
Durability You Can Trust
IP65 protection and a lightweight carbon fiber body make it portable and tough, while the built in IMUs monitor movement and calibrate the tilt sensors to alert the operator of any abnormalities.
A Comprehensive Solution
DJI lists it as compatible with the Phantom 4 RTK, P4 Multispectral, MG 1P RTK, Agras T16, Agras T20, Matrice 210 RTK V2, Matrice 300 RTK and DJI Inspire 3 (with the corresponding firmware and mode), for surveying, inspection, agriculture and other industrial work.
Technical Specifications
| Product Type |
GNSS RTK station |
| GNSS Frequency |
GPS: L1 C/A, L2, L5; BeiDou: B1, B2, B3; GLONASS: F1, F2; Galileo: E1, E5A, E5B |
| Positioning Accuracy (Single Point) |
Horizontal 1.5 m (RMS); Vertical 3.0 m (RMS) |
| Positioning Accuracy (RTK) |
Horizontal 1 cm + 1 ppm (RMS); Vertical 2 cm + 1 ppm (RMS) |
| Positioning Update Rate |
1, 2, 5, 10 and 20 Hz |
| Cold Start / Hot Start |
<45 s / <10 s |
| Differential Data Format |
RTCM 2.X/3.X |
| IMU |
Built in 6 axis accelerometer, movement monitoring, sloping measurements, electronic bubble level |
| Dimensions (body with extension rod) |
168 × 168 × 1800 mm |
| Ingress Protection |
IP65 |
| Data Link |
OcuSync, WiFi, LAN, 4G |
| Communication Distance |
2 km (OcuSync, unobstructed and free of interference) |
| Power Consumption |
12 W |
| Power Supply |
16.5 to 58.8 V DC |
| Battery |
Lithium ion, 4920 mAh, 37.3 Wh |
| Run Time |
WB37 battery: >2 h; MG 12000P battery: >50 h |
| Operating Temperature |
-20° to 55° C (-4° to 131° F) |
In the Box
- D RTK 2 Mobile Station: D RTK 2 Mobile Station × 1
- D RTK 2 Tripod: D RTK 2 Tripod × 1
- D RTK 2 Mobile Station + Tripod: D RTK 2 Mobile Station × 1, D RTK 2 Tripod × 1
Available Configurations
- D RTK 2 Mobile Station
- D RTK 2 Tripod
- D RTK 2 Mobile Station + Tripod
Our team confirms the exact configuration with your order.
Frequently Asked Questions
Which drones work with the DJI D RTK 2 Mobile Station?
DJI lists the Phantom 4 RTK, P4 Multispectral, MG 1P RTK, Agras T16, Agras T20, Matrice 210 RTK V2, Matrice 300 RTK and DJI Inspire 3 (after updating to the required firmware and switching to the matching mode).
What is the difference between the D RTK 2 and the D RTK 3?
The D RTK 2 Mobile Station is a GNSS base station with OcuSync, WiFi, LAN and 4G links. The newer D RTK 3 Multifunctional Station adds relay and rover modes, O4 Enterprise transmission and IP67 protection.
Do I need a tripod?
Yes, the station should be set up on a tripod. Choose the D RTK 2 Tripod or a Mobile Station + Tripod option.