Insta360 ONE RS Accessories

64 products

  • Insta360 Bike Tail Mount Kit Price in Pakistan - Lens Ground

    Insta360 Insta360 Bike Tail Mount Kit

    Insta360 Bike Tail Mount Kit Key Specifications Upgraded tail mount kit for third person cycling shots Mount below the seat or build a full third person setup Dual clamps and multiple clamping points for stability Gimbal inspired angle adjustment Designed for road bikes Product Description The Insta360 Bike Tail Mount Kit is the official Insta360 bike mount kit for recording your ride from behind, drone free. Record your ride With an Insta360 360° action cam and an Invisible Selfie Stick, you get an immersive third person view of your ride. Dual clamps, max stability The design mounts below the seat and at your bicycle's tail. Flexible angles A gimbal inspired design lets you adjust the shot angle freely, and it switches easily via the Bike Seat Rail Mount for below seat or full third person shots. Technical Specifications Brand Insta360 Compatibility Insta360 X6, X5, X4 Air, X4, X3, ONE X2, ONE RS, ONE RS Twin and 4K, ONE R, ONE X, GO Ultra, GO 3S, GO 3, GO 2, Ace Pro 2, Ace Pro and Ace Designed for Road bikes Clamping Main clamp, two clamp brackets and support clamp Note Check the fit with your seat post and add a silicone pad if needed In the Box 1x Bike Tail Mount Main Clamp 1x Bike Tail Mount Clamp Bracket A 1x Bike Tail Mount Clamp Bracket B 1x Support Clamp 2x 55mm M5 Bolts 2x 44mm M5 Bolts 2x Silicone Pads 1x Bike Seat Rail Mount Clamp Bracket 1x Bike Seat Rail Mount Clamp 2x 16mm M4 Bolts 1x 1/4" to 2 Prong Adapter (Upgraded) 2x Thumb Screws 1x Hex Wrench 4x Anti Slip Rings Frequently Asked Questions Can I use the tail mount alone with a selfie stick? No. Insta360 says to use it with the Bike Seat Rail Support Clamp, not alone with a selfie stick and camera. Where can I use it? For safety it is only suitable for riding on flat roads, and the setup must not stick out wider than the handlebars.

    Price on WhatsApp

  • Insta360 Mini 2 in 1 Tripod 2.0 Price in Pakistan Mini 2-in-1 Tripod 2.0 - Lens Ground

    Insta360 Insta360 Mini 2 in 1 Tripod 2.0

    Insta360 Mini 2 in 1 Tripod 2.0 Key Specifications Official Insta360 product name: Mini 2-in-1 Tripod 2.0 All in one design: use it as a selfie stick or fold out the built in tripod 58.5cm selfie stick length Universal 3 Prong Adapter and 1/4" to 2 Prong Adapter Compatible with the Insta360 Mini Remote to start and stop recording Storage Cover holds up to two microSD cards Available in black and white, with Remote Kit and GO Ultra versions Product Description The Insta360 Mini 2 in 1 Tripod 2.0 is a small tripod with big potential and a new design, made for Insta360 360 cameras, action cameras and webcams. More variety, less hassle A simple all in one design lets you switch from the built in tripod to the 58.5cm selfie stick with ease. Small but sturdy The compact design is made for shooting on the go. Cross compatible A universal 3 Prong Adapter and a 1/4" to 2 Prong Adapter work with all your cameras and accessories. Control with a click It is compatible with the Insta360 Mini Remote, so you can start and stop recording with one click. The Mini Remote comes in the Remote Kit or can be bought separately. The tripod also includes a Storage Cover that can store up to two microSD cards. Usage notes With Insta360 GO Series cameras, the Mini Remote button can only wake up the standalone camera. With Insta360 X Series cameras, the Mini Remote Storage Cover on the handle may remain visible in 360 footage when the selfie stick is extended. Technical Specifications Product Mini 2-in-1 Tripod 2.0 Type Selfie stick with built in tripod Selfie Stick Length 58.5cm Adapters Universal 3 Prong Adapter, 1/4" to 2 Prong Adapter Remote Support Insta360 Mini Remote (included in Remote Kit) Storage Storage Cover for up to two microSD cards Colours Black, White Compatibility Insta360 X6, X5, X4 Air, GO Ultra, Ace Pro 2, X4, GO 3S, Link 2 Pro, Link 2C Pro, Link 2, Link 2C, Ace Pro, X3, Ace, GO 3, Link, ONE X, GO 2, ONE X2, ONE R, ONE RS (Twin/4K), ONE RS 1 Inch 360 Edition Remote Kit Compatibility Insta360 X6, X5, X4 Air, GO Ultra, Ace Pro 2, GO 3S In the Box Mini 2-in-1 Tripod 2.0 (Black or White): 1 x Mini 2-in-1 Tripod 2.0 Mini 2-in-1 Tripod 2.0 Remote Kit (Black or White): 1 x Mini 2-in-1 Tripod 2.0, 1 x Mini Remote For GO Ultra: 1 x Mini 2-in-1 Tripod 2.0, 1 x GO Ultra Quick Release Mount Available Configurations Mini 2-in-1 Tripod 2.0 Mini 2-in-1 Tripod 2.0 Remote Kit For GO Ultra - Mini 2-in-1 Tripod 2.0 + GO Ultra Quick Release Mount Mini 2-in-1 Tripod 2.0 White Mini 2-in-1 Tripod 2.0 Remote Kit White Frequently Asked Questions Can it be used as both a selfie stick and a tripod? Yes. It switches from the built in tripod to a 58.5cm selfie stick. Is the Mini Remote included? Only in the Remote Kit versions. The standard version is compatible with the Mini Remote, which can be bought separately. Which cameras does it work with? Insta360 lists the X6, X5, X4 Air, GO Ultra, Ace Pro 2, X4, GO 3S, Link series, Ace Pro, X3, Ace, GO 3, ONE X, GO 2, ONE X2, ONE R and ONE RS series.

    Price on WhatsApp

  • Insta360 Flexi Clip Price in Pakistan - Lens Ground

    Insta360 Insta360 Flexi Clip

    Insta360 Flexi Clip Key Specifications Clip and shoot design for instant setup and a wide variety of angles Pair with an X series camera for panoramic perspectives and MultiView picture in picture and split screen footage Ball socket offers complete 360° flexibility for precise framing Velcro strap and anti slip rings for dual lock stability on objects 10 to 24mm thick Maximum load 250g Compatibility: Insta360 X6, X5, X4 Air, X4, X3, ONE X2, ONE RS, GO Ultra, GO 3S, GO 3, Ace Pro 2, Ace Pro and Ace Product Description The Insta360 Flexi Clip lets you clip on, start shooting and make road trip memories. Never miss a moment Attach it to your sun visor for full panoramic views of the road, and go immersive with dual lens mode to get 360° shots and unique MultiView videos. Stable shots guaranteed The dual lock system of a velcro strap and anti slip silicone holds steady, even on bumpy roads. Adjust on the fly The quick release ball socket lets you readjust your shooting angle and check your footage easily. Complete compatibility It can be used in any vehicle with a sun visor, and attaches to any object between 10 and 24mm thick. Usage notes Use the included hex wrench to tighten or loosen the lever on the ball socket, and make sure the socket is securely locked. Insta360 recommends the passenger side sun visor so the driver's view is not limited. Do not install it on a loose sun visor, use it only on flat roads, and keep the car cool in direct sunlight to prevent the camera overheating. Technical Specifications Product Insta360 Flexi Clip Clamping Range 10 to 24mm Maximum Load 250g Head 360° quick release ball socket Locking Velcro strap and anti slip silicone rings Compatibility Insta360 X6, X5, X4 Air, X4, X3, ONE X2, ONE RS, GO Ultra, GO 3S, GO 3, Ace Pro 2, Ace Pro, Ace In the Box 1 x Flexi Clip 1 x Hex wrench Available Configurations Insta360 Flexi Clip Frequently Asked Questions What thickness of sun visor does it fit? Sun visors and other objects 10 to 24mm thick. How much weight can it hold? The Flexi Clip has a maximum weight threshold of 250g. Which side of the car should I use? Insta360 recommends the passenger side sun visor so the driver's visibility is not limited.

    Price on WhatsApp

  • Insta360 All Purpose Tripod Price in Pakistan - Lens Ground

    Insta360 Insta360 All Purpose Tripod

    Insta360 All Purpose Tripod Key Specifications Seriously stable tripod with extendable legs Leg radius: 152mm collapsed, 232mm extended Material: aluminum alloy Weight: 187g; load capacity: 500g Top screw: 1/4" standard screw Works with Insta360 360 cameras, action cameras and Flow gimbals Product Description The Insta360 All Purpose Tripod is a compact camera tripod that is seriously stable thanks to its extendable legs. Pair it with a selfie stick for low angle and standing shots with your Insta360 camera, or use it with an Insta360 Flow gimbal. Extendable legs The legs extend from a 152mm radius to a 232mm radius for a wider, more stable base. Universal mount A 1/4" standard screw on top fits Insta360 cameras and accessories. With Ace Pro 2, Ace Pro or Ace, the Quick Release Mount or the 3 Prong to 1/4" Adapter is needed and sold separately. Technical Specifications Product Insta360 All Purpose Tripod Material Aluminum alloy Weight 187g Color Black Load Capacity 500g Top Screw 1/4" standard screw Radius (Legs Collapsed) 152mm Radius (Legs Extended) 232mm Compatibility Insta360 X6, X5, X4 Air, X4, X3, Luna Ultra, GO Ultra, GO 3S, GO 3, GO 2, Ace Pro 2, Ace Pro, Ace, Flow 2 Series, Flow Pro, Flow, ONE RS (Twin/4K), ONE RS 1 Inch 360 Edition, ONE X2, ONE R, ONE X, ONE In the Box 1 x All Purpose Tripod Available Configurations All-Purpose Tripod Frequently Asked Questions How much weight can the All Purpose Tripod hold? It has a load capacity of 500g. Can I use it with Ace Pro 2 or Ace Pro? Yes, with the Quick Release Mount or the 3 Prong to 1/4" Adapter, sold separately.

    Price on WhatsApp

  • Insta360 Heavy Duty Clamp Price in Pakistan - Lens Ground

    Insta360 Insta360 Heavy Duty Clamp

    Insta360 Heavy Duty Clamp Key Specifications Powerful universal clamp that securely fixes your camera to handlebars, bumpers and more All new design with no ball joint for stabler shots Fits round tubes from 17 to 37mm (0.67 to 1.46in) in diameter Aluminum alloy, zinc alloy, stainless steel and plastic build Weight: 272g (9.6oz) Same clamp as in the Insta360 Motorcycle Kit Product Description The Insta360 Heavy Duty Clamp is a camera clamp mount for stable, safe shots as you ride, the perfect companion for motorcyclists using Insta360 360 cameras and action cameras. A powerful, must have clamp for motorcyclists Mount your camera quickly on your handlebars and capture steady footage in seconds. Unquestionably secure and steady Designed without a ball joint, the Heavy Duty Clamp smooths out even the roughest rides and locks in the shooting angle for incredibly stable footage. Technical Specifications Product Insta360 Heavy Duty Clamp Materials Aluminum alloy, zinc alloy, stainless steel and plastic Weight 272g (9.6oz) Dimensions 124 x 73 x 53mm (4.9 x 2.9 x 2.0in) Tube Diameter 17 to 37mm (0.67 to 1.46in) Compatibility Insta360 X6, X5, X4 Air, X4, X3, GO Ultra, GO 3S, GO 3, GO 2, Ace Pro 2, Ace Pro, Ace, ONE RS (Twin/4K), ONE X2, ONE R, ONE X, ONE (GO 3S and GO 3 require the Quick Release Mount) In the Box 1 x Heavy Duty Clamp 4 x Anti Slip Rings 1 x Hex Wrench 1 x 3 Prong to 1/4" Adapter 1 x Thumb Screw 1 x Clamp Mount Wrench Available Configurations Heavy Duty Clamp Frequently Asked Questions What can I mount it on? Round tubes such as handlebars or bumpers with a diameter of 17 to 37mm. Do not attach it to irregularly shaped objects as there is a risk of detachment. On smooth metal tubes, tighten the clamp with the included wrench. Can I use a selfie stick with it? Only the Insta360 Action Invisible Selfie Stick, extended to 100cm or less and connected to the 1/4" screw on the clamp. Does it work with GO 3S or GO 3? Yes, but the Quick Release Mount is required to use the Heavy Duty Clamp with Insta360 GO 3S or GO 3.

    Price on WhatsApp

  • Insta360 Bike Seat Rail Mount Price in Pakistan - Lens Ground

    Insta360 Insta360 Bike Seat Rail Mount

    Insta360 Bike Seat Rail Mount Key Specifications Mounts on the bike seat rail for fresh angles Lightweight, high strength aluminium alloy 3 prong mount for all Insta360 action cameras Includes a 2 prong to 1/4" adapter Not for bikes with spring seats Product Description The Insta360 Bike Seat Rail Mount is the official Insta360 bike mount that shows your ride from a different perspective, mounted on your saddle's seat rail. Fresh new angles Leave the handlebar behind and capture your entire ride from the starting line to the final flag. Lightweight and heavy duty The lightweight chassis uses high strength aluminium alloy for strength and stability. Universal mount A 3 prong mount and the included 2 prong to 1/4" adapter give complete Insta360 action camera compatibility. Technical Specifications Brand Insta360 Compatibility Insta360 X6, X5, X4 Air, X4, X3, ONE X2, ONE RS, ONE RS Twin and 4K, ONE R, ONE X, GO Ultra, GO 3S, GO 3, GO 2, Ace Pro 2, Ace Pro and Ace Material High strength aluminium alloy Mount 3 prong, with 2 prong to 1/4" adapter Recommended speed Under 60km/h (37mph) on smooth roads, under 40km/h (25mph) on uneven roads In the Box 1x Insta360 Bike Seat Rail Mount with 2 prong to 1/4" adapter Frequently Asked Questions Does it work with X series cameras? Yes. On rough terrain Insta360 recommends combining it with an X Series Utility Frame, and not mounting the camera vertically. Does it fit every bike? It is not compatible with bicycles that use spring seats.

    Price on WhatsApp

  • Insta360 Third Person Backpack Mount Price in Pakistan - Lens Ground

    Insta360 Insta360 Third Person Backpack Mount

    Insta360 Third Person Backpack Mount Key Specifications Epic third person shots with no friends or drones necessary Carbon fiber pole on a high damping ball head design Adjustable straps fit a wide variety of backpacks Materials: aluminum alloy, nylon and carbon fiber Includes Backpack Mount Frame, 2 Backpack Straps, 2 Waist Straps and Carbon Fiber Pole Compatible with Insta360 X6, X5, X4 Air, X4, X3, Ace Pro 2, Ace Pro, Ace, ONE RS (Twin/4K), ONE X2, ONE R, ONE X and ONE Product Description The Insta360 Third Person Backpack Mount is a backpack camera mount for drone like third person shots without the hassle of operating a drone. Capture every angle hands free with your 360 camera while the lightweight construction keeps your focus on the action. Look, no hands Free your hands for full send adventures such as skiing. No drone? No problem Get 3rd person follow shots that will have people asking how you shot them. Smooth, steady, stabilized The high damping ball head design combined with FlowState Stabilization on your Insta360 camera creates smooth shots. Easy to wear and easy to shoot Lightweight, durable construction with adjustable straps fits a wide variety of backpacks. Technical Specifications Product Insta360 Third Person Backpack Mount Materials Aluminum alloy, nylon, carbon fiber Head High damping ball head Straps Adjustable backpack straps and waist straps Compatibility Insta360 X6, X5, X4 Air, X4, X3, Ace Pro 2, Ace Pro, Ace, ONE RS (Twin/4K), ONE X2, ONE R, ONE X, ONE In the Box 1 x Backpack Mount Frame 2 x Backpack Strap 2 x Waist Strap 1 x Carbon Fiber Pole Available Configurations Third-Person Backpack Mount Frequently Asked Questions Can I use it with Ace Pro 2, Ace Pro or Ace? Yes, but Insta360 says you must buy the Quick Release Mount or the 3 Prong to 1/4" Adapter separately. Does it work with an empty backpack? Insta360 notes that shooting with an empty backpack may affect the shooting effect. Since the camera is behind you, also take extra care to avoid collisions that may damage the camera.

    Price on WhatsApp

  • Insta360 Bullet Time Selfie Stick 2.0 Price in Pakistan - Lens Ground

    Insta360 Insta360 Bullet Time Selfie Stick 2.0

    Insta360 Bullet Time Selfie Stick 2.0 Key Specifications Just swing it for instant Hollywood style Bullet Time effects 65°, 75° and 90° shooting angles and a maximum length of 120cm Two in one Bullet Time Component and selfie stick, no extra accessories needed to switch modes The selfie stick becomes invisible when used with a 360 camera 1/4" mounting point at the bottom Compatibility: Insta360 X6, X5, X4 Air, X4, X3, ONE X2, ONE RS, ONE X and ONE R Product Description The Insta360 Bullet Time Selfie Stick 2.0 is a new twist on an Insta360 classic: enter the Matrix with a flick of your wrist. No drone? No problem The selfie stick disappears from 360 footage, creating stunning drone like shots. Three new angles to keep everyone in the frame The upgraded design allows for 65°, 75° and 90° rotation angles, so everyone fits in the shot. Two modes, one accessory Effortlessly switch between shooting Bullet Time and taking third person shots with a selfie stick that extends up to 120cm. Usage notes Only use Bullet Time Mode with Insta360 X series cameras, and make sure the camera is securely connected first. In Selfie Stick Mode, do not loosen the knob to extend or retract the Bullet Time Component. The stick can be used in fresh water but not in salt water; after use in water, shake out excess water through the drainage hole and let it dry. The lower the angle, the better the view, but the invisible selfie stick effect becomes harder to achieve. Do not use additional accessories on the 1/4" point during high intensity activities. Technical Specifications Product Bullet Time Selfie Stick 2.0 Maximum Length 120cm Bullet Time Angles 65°, 75°, 90° Modes Bullet Time Mode, Selfie Stick Mode Bottom Mount 1/4" mounting point Water Use Fresh water only, with drainage hole Compatibility Insta360 X6, X5, X4 Air, X4, X3, ONE X2, ONE RS (Twin/4K), ONE RS, ONE X, ONE R In the Box 1 x Bullet Time Selfie Stick 2.0 Available Configurations Bullet Time Selfie Stick 2.0 Frequently Asked Questions Do I need a separate Bullet Time handle? No. The Bullet Time Component and selfie stick are two in one, so you can switch modes without any additional accessories. Can I use Bullet Time Mode with any camera? Insta360 advises using Bullet Time Mode only with Insta360 X series cameras. Can it be used in water? It can be used in fresh water but not in salt water. Drain and dry it after use.

    Price on WhatsApp

  • Insta360 Selfie Stick Sleeve Price in Pakistan For 114cm/85cm Invisible Selfie Stick - Lens Ground

    Insta360 Insta360 Selfie Stick Sleeve

    Insta360 Selfie Stick Sleeve Key Specifications Comfortable silicone grip for easier handling of your selfie stick Ergonomic spindle shape for an easier grip over extended periods Durable and non slip design Two versions: for the 114cm/85cm Invisible Selfie Stick or the Action Invisible Selfie Stick Does not block the 1/4" screw interface on the bottom of the selfie stick Product Description The Insta360 Selfie Stick Sleeve is a selfie stick grip accessory that gives a comfortable hold for easier handling, making shooting easier. Proven comfortable The ergonomic design reduces strain over long periods of time. Durable and non slip design A grip that you will want on all of your selfie sticks. Slide the sleeve on from the top of the selfie stick (1/4" screw side), and pull it off upward from the same direction to remove it. Technical Specifications Product Insta360 Selfie Stick Sleeve Outer Diameter (for 114cm/85cm Invisible Selfie Stick) 32.5mm (1.3in) Inner Diameter (for 114cm/85cm Invisible Selfie Stick) 21.4mm (0.8in) Length (for 114cm/85cm Invisible Selfie Stick) 159mm (6.3in) Weight (for 114cm/85cm Invisible Selfie Stick) 53g (1.9oz) Outer Diameter (for Action Invisible Selfie Stick) 32.7mm (1.3in) Inner Diameter (for Action Invisible Selfie Stick) 23.1mm (0.9in) Length (for Action Invisible Selfie Stick) 148mm (5.8in) Weight (for Action Invisible Selfie Stick) 48g (1.7oz) Compatibility Invisible selfie sticks used with Insta360 X6, X5, X4 Air, X4, X3, GO Ultra, GO 3S, GO 3, GO 2, Ace Pro 2, Ace Pro, Ace, ONE RS 1 Inch 360 Edition, ONE RS (Twin/4K), ONE X2, ONE R, ONE X In the Box 1 x Selfie Stick Sleeve (for the selected selfie stick version) Available Configurations For 114cm/85cm Invisible Selfie Stick For Action Invisible Selfie Stick Frequently Asked Questions Which version should I choose? The sleeve comes in two versions, designed for either the Action Invisible Selfie Stick or the 114cm/85cm Invisible Selfie Stick. Select the one that matches your selfie stick for the best fit. Should I keep the sleeve on when the stick is not handheld? For scenarios where the selfie stick is not handheld, Insta360 recommends removing the sleeve for a better invisible effect in videos.

    Price on WhatsApp

  • Insta360 Suction Cup Car Mount Price in Pakistan Suction Cup Car Mount - Lens Ground

    Insta360 Insta360 Suction Cup Car Mount

    Insta360 Suction Cup Car Mount Key Specifications Double ball mount design for maximum adjustability Strong suction cup for a firm mount on a smooth, flat surface Tough, high strength aluminum alloy design Folds into a pocket sized package with a quick release wrench Dual and Triple Suction Cup Car Mount versions for third person car shots with the Action Invisible Selfie Stick Compatible with Insta360 X6, X5, X4 Air, X4, X3, Ace Pro 2, Ace Pro, Ace, GO 3S, GO 3, GO 2, ONE RS (Twin/4K), ONE X2, ONE R, ONE X and ONE Product Description The Insta360 Suction Cup Car Mount is a car camera mount that lets you shoot from any angle. Insta360 sells this single suction cup mount made by PGYTECH (model P-GM-132). It must be connected directly to the camera and cannot be used with other extensions or selfie sticks. Adjust to any angle The double ball mount design allows for maximum adjustability. A firm seal The strong suction cup is ideal for a firm mount on a smooth and flat surface such as glass. Tough as nails A tough and durable high strength aluminum alloy design. Easy to carry It folds up into a pocket sized package. It can be folded only for transport or short periods, not for long term storage. Dual and Triple Suction Cup Car Mount versions The Dual and Triple versions are sold by Insta360 as the Dual/Triple Suction Cup Car Mount. They give unique third person views of your car with the Insta360 Action Invisible Selfie Stick, which disappears from 360 shots. Triple suction cups form a triangular structure for maximum stability on country roads, while the dual suction cups suit city driving and flat roads. The modular design splits into double or single suction cup holders, and each suction cup has a static suction force of up to 20kg. These versions can only be used with the Action Invisible Selfie Stick. Technical Specifications Product Insta360 Suction Cup Car Mount Model (single mount) PGYTECH P-GM-132 Material (single mount) PA66+GF, TPU, aluminium Net Weight (single mount) 138g Size (single mount) 138 x 93.5 x 85mm Suction Force (Dual/Triple) Up to 20kg static suction force per cup Operating Temperature (Dual/Triple) 0°C to 40°C (32°F to 104°F) Compatibility Insta360 X6, X5, X4 Air, X4, X3, Ace Pro 2, Ace Pro, Ace, GO 3S, GO 3, GO 2, ONE RS (Twin/4K), ONE X2, ONE R, ONE X, ONE; Dual/Triple also GO Ultra In the Box Suction Cup Car Mount: 1 x Suction Cup Car Mount Dual or Triple Suction Cup Car Mount, Standard: the dual or triple suction cup set with bars and clamps, as shown in the kit image With Action Invisible Selfie Stick: the same set together with an Action Invisible Selfie Stick Available Configurations Suction Cup Car Mount Dual Suction Cup Car Mount, Standard Dual Suction Cup Car Mount, With Action Invisible Selfie Stick Triple Suction Cup Car Mount, Standard Triple Suction Cup Car Mount, With Action Invisible Selfie Stick Frequently Asked Questions Can I use a selfie stick with the single Suction Cup Car Mount? No. The single mount must be connected directly to the camera. For selfie stick shots, choose a Dual or Triple version with the Action Invisible Selfie Stick. Can I use the Dual/Triple mount on public roads? Insta360 does not recommend it on public roads. Make sure the surrounding road environment is safe and use only the Action Invisible Selfie Stick. Where should I install the suction cup? Install it on a smooth, flat surface such as glass.

    Price on WhatsApp

  • Insta360 Floating Surfboard Mount Price in Pakistan - Lens Ground

    Insta360 Insta360 Floating Surfboard Mount

    Insta360 Floating Surfboard Mount Key Specifications Mount designed for surfing to unlock the best angles Floatable and sink proof to keep your camera safe if it gets knocked off Stable 3M Dual Lock Reclosable Fastener design for extra protection Strong 3M adhesive base with superior water resistance and long lasting durability Compatibility: Insta360 X6, X5, X4 Air, X4, X3, GO Ultra, GO 3S, GO 3, GO 2, Ace Pro 2, Ace Pro, Ace, ONE RS, ONE X2, ONE R and ONE X Product Description The Insta360 Floating Surfboard Mount lets you ride the waves and capture it all. The X4 Vertical Horizontal Mount and Quick Release Mount are sold separately; make sure the Quick Release Mount is installed correctly before use. Go with the flow The floatable and sink proof design means you can ride the waves knowing your camera is safe, even if it gets knocked off. Double locked An ultra strong 3M Dual Lock Reclosable Fastener keeps it securely in place and is easy to attach and remove. Made for the long haul A high strength, water resistant 3M adhesive base that can handle a wipeout. Usage notes The Sticky Base is highly adhesive and cannot be reapplied once removed, so simply leave it on the board after surfing. To remove it, soften the adhesive with a hair dryer and peel it from the edge; never use sharp objects. With GO 3 or GO 3S, use the GO 3/GO 3S Vertical and Horizontal Action Mount Set, not the Quick Release Mount, and fit the Dive Case first if you use the Action Pod. These are sold separately. Technical Specifications Product Floating Surfboard Mount Buoyancy Floatable, sink proof Fastener 3M Dual Lock Reclosable Fastener Base Water resistant 3M adhesive Sticky Base (single use) Storage Temperature -10 to 60°C Compatibility Insta360 X6, X5, X4 Air, X4, X3, GO Ultra, GO 3S, GO 3, GO 2, Ace Pro 2, Ace Pro, Ace, ONE RS (Twin/4K), ONE X2, ONE R, ONE X In the Box Floating Surfboard Mount: 1 x Floating Surfboard Mount with Sticky Base Floating Surfboard Mount Sticky Base: 1 x Sticky Base Available Configurations Floating Surfboard Mount Floating Surfboard Mount Sticky Base Frequently Asked Questions Will my camera sink if it gets knocked off? No. The mount is floatable and sink proof. Can I reuse the Sticky Base? No. The Sticky Base cannot be reapplied after removal. A replacement Sticky Base is available as a separate option. Are the camera mounts included? No. The X4 Vertical Horizontal Mount, Quick Release Mount and GO 3/GO 3S mounts are sold separately.

    Price on WhatsApp

  • Insta360 Unicorn Helmet Mount Price in Pakistan - Lens Ground

    Insta360 Insta360 Unicorn Helmet Mount

    Insta360 Unicorn Helmet Mount Key Specifications Carbon fiber rod for drone like third person angles from your helmet Rod length: 300 ±10mm (11.8in) Rod material: carbon fiber, stainless steel and aluminum alloy Arc shaped base fixes to the helmet with 3M adhesive Two safety tethers included for extra protection Compatible with Insta360 X6, X5, X4 Air, X4, X3, GO 3S, GO 3, ONE RS (Twin/4K), ONE X2, ONE R and ONE X Product Description The Insta360 Unicorn Helmet Mount is a helmet camera mount with a carbon fiber rod that places your Insta360 camera above your head for drone like angles. It is suitable for action sports like bike riding, skiing, motorcycling and skateboarding. Thin and lightweight The mount sits on your helmet and lets you move with ease. Tough and secure A carbon fiber design with high tensile strength keeps your camera secure. Ready for the elements The corrosion resistant design can be used in rain, snow or sunshine. A safe fit The arc shaped base fits your helmet closely. Attach the safety tether for extra protection. Compatible with GO Ultra Insta360 GO Ultra can be used with the Unicorn Helmet Mount through a GO Ultra Quick Release Mount or Action Mount. Technical Specifications Product Insta360 Unicorn Helmet Mount Rod Length 300 ±10mm (11.8in) Rod Material Carbon fiber, stainless steel and aluminum alloy Application Skiing, mountain biking, motorcycling, skateboarding and other sports that require helmets Recommended Speed Limit 80km/h on flat roads and 40km/h on uneven roads Operating Temperature −20°C to 40°C Camera Weight Not more than 200g when used with other cameras (tested with Insta360 cameras) Compatibility Insta360 X6, X5, X4 Air, X4, X3, GO 3S, GO 3, ONE RS (Twin/4K), ONE X2, ONE R, ONE X; GO Ultra with a GO Ultra Quick Release Mount or Action Mount In the Box 1 x Unicorn Rod 2 x Curved Base 2 x 1/4" Thumb Screw 1 x 1/4" Camera Mount Adapter 3 x 3M Adhesive 4 x Stabilizer Ring 2 x Safety Tether 1 x Thumb Screw Wrench 1 x Fixing Nut Available Configurations Carbon Fiber Mount Frequently Asked Questions Which sports is the Insta360 Unicorn Helmet Mount suitable for? It is made for action sports like bike riding and skiing. Insta360 says it is not suitable for skydiving, bungee jumping, wing mounted flying and other high speed aerial sports where the mount can get caught in a parachute. Can I use it on a matte helmet? No. Insta360 advises not to use this accessory if the surface of your helmet has a matte finish. Fix the 3M sticker on a clean, dry and smooth surface close to the arc of the base and leave it for at least 24 hours at room temperature. Why does my rod look different? The Unicorn rod may come with a matte surface or a polished surface. The function of both is identical.

    Price on WhatsApp

  • Insta360 Motorcycle Magic Arm Price in Pakistan - Lens Ground

    Insta360 Insta360 Motorcycle Magic Arm

    Insta360 Motorcycle Magic Arm Key Specifications Official Insta360 product name: Motorcycle Magic Arm Robust mount for handlebars on most mainstream motorcycles, including sport and naked bikes Full 360 degree rotation to shoot every perspective of your ride Fits 13 to 19mm hollow handlebars with replaceable plugs Fits threaded handlebars with 8mm, 10mm or 12mm holes Universal interface for Insta360 X, Ace and GO Series cameras Compatibility: Insta360 X6, X5, X4 Air, X4, X3, Ace Pro 2, Ace Pro, Ace, GO Ultra, GO 3S, GO 3 and more Product Description The Insta360 Motorcycle Magic Arm is a robust, reliable handlebar mount that unlocks limitless riding perspectives. It supports the handlebars of most mainstream motorcycles, including sport and naked bikes, and securely holds your Insta360 X, Ace or GO Series camera. Capture every angle of your ride Adjust the angle with a full 360 degree rotation. Lean into turns, shift gears or hit the brakes and never miss a moment of the action. Ride steady, shoot steady Expansion inserts secure it firmly to the handlebar, withstanding bumps and shakes to keep your shots steady. Easy on, easy off Remove the arm after your ride and leave the base in place as your end plug. A smarter setup that saves time every ride. Every rider's essential companion Compatible with most motorcycle handlebars: hollow handlebars with removable end plugs (inner diameter 13 to 19mm) and handlebars with threaded holes (thread diameter 8mm, 10mm or 12mm). Safety notes Attach a 360 camera directly to the arm without an adapter, and do not use the arm with selfie sticks, helmet mounts or other extensions. Do not extend the arm or mount the camera outside the motorcycle's frame. Use it only on paved roads or tracks, not for off road riding, and check that it is tight whenever you stop. Always follow local laws and regulations. Technical Specifications Product Name Motorcycle Magic Arm Brand Insta360 Product Type Motorcycle Handlebar Mount Rotation 360 degrees Hollow Handlebars Inner diameter 13 to 19mm, with removable end plugs Threaded Handlebars 8mm-1.25, 10mm-1.25, 10mm-1.5, 12mm-1.25 or 12mm-1.5 threads Mounting Interface Universal Insta360 interface Use Paved roads and tracks only Compatibility Insta360 X6, X5, X4 Air, X4, X3, ONE X2, ONE RS, ONE R, ONE X, ONE, Ace Pro 2, Ace Pro, Ace, GO Ultra, GO 3S, GO 3, GO 2 In the Box 1 x Insta360 Motorcycle Magic Arm Replaceable handlebar plugs and screw adapters Available Configurations Motorcycle Magic Arm Frequently Asked Questions Which handlebars does it fit? Hollow handlebars with removable end plugs and an inner diameter of 13 to 19mm, and handlebars with 8mm, 10mm or 12mm threaded holes. Which cameras can I mount? Insta360 X, Ace and GO Series cameras, including X6, X5, X4 Air, Ace Pro 2 and GO Ultra. Can I use it with a selfie stick? No. Insta360 advises against using it with selfie sticks, helmet mounts or other extensions, and 360 cameras should attach directly without an adapter.

    Price on WhatsApp

  • Insta360 Helmet Chin Mount 2.0 Price in Pakistan - Lens Ground

    Insta360 Insta360 Helmet Chin Mount 2.0

    Insta360 Helmet Chin Mount 2.0 Key Specifications Universal 3 prong connector for Insta360 cameras Built in invisible Mic Mount for helmet microphones Fits full face, modular, off road and dual sport helmets Improved buckle mechanism for stability Maximum load 250g (8.8oz) Product Description The Insta360 Helmet Chin Mount 2.0 is the official Insta360 helmet mount for capturing immersive first person action shots from the chin of your helmet. Designed for immersion The updated design uses a 3 prong mount for universal camera compatibility. GO and X series cameras need an additional Vertical Horizontal Mount, which is not included. Mount your mic Chat with other riders and record motovlog audio with the hidden built in Mic Mount, which works with a wide range of helmet microphones. Comfortable compatibility An improved buckle mechanism keeps the mount stable, even on the wildest rides, on a wide variety of helmets. Technical Specifications Brand Insta360 Compatibility Insta360 X6, X5, X4 Air, X4, X3, ONE X2, ONE RS, ONE RS Twin and 4K, ONE R, GO Ultra, GO 3S, GO 3, GO 2, Ace Pro 2, Ace Pro and Ace Mount type 3 prong Maximum load 250g (8.8oz) Helmet types Full face, modular, off road and dual sport Note GO 3S and GO 3 need the GO 3/GO 3S Vertical & Horizontal Action Mount Set; X5, X4 and X3 need a Vertical Horizontal Mount; GO Ultra needs a GO Ultra Quick Release Mount or Action Mount In the Box 1x Insta360 Helmet Chin Mount 2.0 Frequently Asked Questions Do I need anything extra for Insta360 X5 or GO 3S? Yes. X5, X4 and X3 need a Vertical Horizontal Mount, GO 3S and GO 3 need the Vertical & Horizontal Action Mount Set, and GO Ultra needs a GO Ultra Quick Release Mount or Action Mount. What is the maximum camera weight? The Helmet Chin Mount 2.0 has a maximum load capacity of 250g (8.8oz). Which helmets does it fit? It is compatible with full face, modular, off road and dual sport helmets.

    Price on WhatsApp

  • Insta360 Electric Suction Cup Mount Price in Pakistan - Lens Ground

    Insta360 Insta360 Electric Suction Cup Mount

    Insta360 Electric Suction Cup Mount Key Specifications Official Insta360 product name: Electric Suction Cup Mount One touch electric suction with an automatic sensor for strong, steady hold Proven to handle 800G impacts on bumpy roads Up to 120 hours on a single charge, with up to 5 days of suction Double ball head rotates a full 360 degrees Compatible with NATO rails and the Insta360 Dual/Triple Suction Cup Car Mount Safety rope hole for extra security Compatibility: Insta360 X, Ace and GO Series cameras Product Description The Insta360 Electric Suction Cup Mount lets you film your own road movie. It is a strong suction mount for epic car shots: one touch locks it instantly, and the automatic sensor maintains strong and steady suction. Drive with confidence The electronic pump automatically removes air with a built in sensor for strong, steady suction, and it is tested to handle bumpy off road drives and winding mountain roads. Under lab conditions the suction cup reaches a maximum holding force of 50kg on a flat vertical surface and keeps a minimum of 30kg during continuous use. One touch suction Press once and the mount locks instantly. The sensor keeps checking suction strength so your camera stays safe while you keep your eyes on the road. Stick once, shoot all day The long lasting battery offers up to 120 hours of power with up to 5 days of suction on a full charge, ideal for road trips. Run time is based on the mount refreshing its suction once every hour and varies with surface smoothness and vibration. Shoot from any angle The double ball head rotates a full 360 degrees to nail any angle from your roof, hood or trunk. Compatible with Insta360 Ace, X and GO Series cameras. More shots, more fun Compatible with NATO rails and the Insta360 Dual/Triple Suction Cup Car Mount (sold separately) to unlock more cinematic angles. Double security A safety rope hole lets you attach a cord (sold separately), so your camera stays put even on steep hills or at high speeds. Usage notes Do not use the mount in the rain, keep it away from grease and solvents, and install it only on a smooth, clean surface. Keep the USB C port plug sealed when not charging, check the battery when parked and recharge below 10%, and do not use it with other accessories such as a selfie stick. Recommended for altitudes below 4,000m. With the Insta360 GO Ultra, the GO Ultra Quick Release Mount (sold separately) is required. Technical Specifications Product Name Electric Suction Cup Mount Brand Insta360 Product Type Car Suction Cup Mount Suction Electric pump with automatic sensor, one touch lock Holding Force Up to 50kg maximum, 30kg minimum in continuous use (lab conditions) Impact Rating Tested to 800G Battery Life Up to 120 hours, up to 5 days of suction per charge Charging Port USB C with silicone plug Ball Head Double ball head, 360 degree rotation Expansion NATO rails, Insta360 Dual/Triple Suction Cup Car Mount Recommended Altitude Below 4,000m (13,123ft) Compatibility Insta360 X6, X5, X4 Air, X4, X3, ONE X2, ONE RS, ONE R, ONE X, ONE, Ace Pro 2, Ace Pro, Ace, GO Ultra (with GO Ultra Quick Release Mount), GO 3S, GO 3, GO 2 In the Box 1 x Insta360 Electric Suction Cup Mount Available Configurations Electric Suction Cup Mount Frequently Asked Questions How long does the battery last? Up to 120 hours on a full charge, with up to 5 days of suction, based on one suction refresh per hour. Can I use it with the GO Ultra? Yes, but the GO Ultra Quick Release Mount is required and sold separately. Can I use it in the rain? No. Insta360 advises not to use the mount in the rain.

    Price on WhatsApp

  • Insta360 FOMO Power Neck Mount Price in Pakistan - Lens Ground

    Insta360 Insta360 FOMO Power Neck Mount

    Insta360 FOMO Power Neck Mount Key Specifications Official Insta360 product name: FOMO Power Neck Mount Neck mount that doubles as a power bank for continuous, hands free first person shots Built in 4800mAh battery charges the camera while filming Up to 7 hours of continuous recording with Insta360 Ace Pro 2 Continuous recording in Pre Recording Mode Works standalone or with the Helmet Chin Mount 2.0, Chest Strap or X5 POV Chest Mount Removable Neck Guard for comfort during long shoots Heat dissipating graphite; certified for CB, 3C, BMSI, PSE and air travel Product Description The Insta360 FOMO Power Neck Mount is a camera neck mount made by Insta360 that doubles as a power bank, giving you continuous power for your POVs. Its built in 4800mAh battery charges the camera while you film, so you never miss a moment with continuous recording in Pre Recording Mode. POVs that do not quit Use it as a standalone neck mount or pair it with chest and chin mounts, such as the Helmet Chin Mount 2.0, Chest Strap or X5 POV Chest Mount, for flexible, hands free POVs wherever you go. Record for hours without worrying about battery life The built in 4800mAh power bank provides up to 7 hours of continuous recording with Insta360 Ace Pro 2. Insta360 tested this in a 25°C lab environment in 4K30fps Video Mode, Endurance Mode, with the screen and WiFi off; run time may vary under different conditions. Lightweight, soft and comfy Designed to sit comfortably around your neck, the removable Neck Guard provides a snug fit for extended shooting sessions. It is built with heat dissipating graphite and certified safe for CB, 3C, BMSI, PSE and air travel. Usage notes Do not use the neck mount in the rain or around water, to avoid moisture entering the USB C port. Avoid dropping, crushing or throwing it, and do not place heavy items on it. Make sure your camera is securely mounted. Clean a dirty USB C port gently with a dry, lint free cloth. Do not store or use it in extreme temperatures. If it has not been used for a long time (for example 3 months), charge it before use, using a proper certified power adapter. Technical Specifications Product Name FOMO Power Neck Mount Brand Insta360 Product Type Camera Neck Mount with Power Bank Battery 4800mAh built in power bank Recording Time Up to 7 hours with Insta360 Ace Pro 2 (4K30fps, Endurance Mode, lab tested) Port USB C Comfort Removable Neck Guard Certifications CB, 3C, BMSI, PSE, air travel Compatibility Insta360 X6, X5, GO Ultra, Ace Pro 2, X4 Air, X4, GO 3S, Ace Pro, X3, Ace, ONE X2, ONE RS (Twin/4K), GO 3 In the Box 1 x Insta360 FOMO Power Neck Mount 1 x Removable Neck Guard Available Configurations Insta360 FOMO Power Neck Mount Frequently Asked Questions Can the neck mount charge my camera while recording? Yes. The built in 4800mAh battery charges the camera while filming, giving up to 7 hours of continuous recording with Ace Pro 2. Which cameras are compatible? Insta360 lists the X6, X5, GO Ultra, Ace Pro 2, X4 Air, X4, GO 3S, Ace Pro, X3, Ace, ONE X2, ONE RS (Twin/4K) and GO 3. Can I use it in the rain? No. Insta360 advises not to use it in the rain or around water, to avoid moisture entering the USB C port.

    Price on WhatsApp

You have seen 64 out of 64 products

Insta360 ONE RS Accessories Price in Pakistan

Shop official Insta360 ONE RS Accessories in Pakistan at Lens Ground: Insta360 mounts, selfie sticks and tripods, kits, protection and carry gear and lenses, lights, audio and remotes made for the Insta360 ONE RS or officially listed by Insta360 as compatible with it. The price list on this page always shows the accessories we have right now. Where a price is shown, you can order directly on our website with delivery across Pakistan. If an accessory shows no price, message us on WhatsApp for today's Insta360 ONE RS Accessories price and stock.

100% genuineOriginal products from leading brands
Free delivery all over PakistanUsually 3 to 5 working days
Easy paymentCash on Delivery, credit/debit card, bank transfer, JazzCash and Easypaisa
Retail storePlot # 28-C, 3rd Floor, Office # 8, Shangani Edifice, South Park Avenue, Phase 2 Ext., DHA, Karachi

Buying Insta360 ONE RS Accessories in Pakistan

  • Models with a price on our website can be ordered directly online. After you order, our team will call or WhatsApp you to confirm the exact model and price.
  • For models without a price, message us directly on WhatsApp. There is no need to place an order on the website for these models.

Which Insta360 ONE RS accessory should you buy?

Insta360 ONE RS Accessories at a glance

Accessory Best for
Insta360 3 Prong to 1/4 Adapter Mounting
Insta360 All Purpose Tripod Selfie stick, grip or tripod shots
Insta360 Bike Kit Complete activity kit
Insta360 Chest Strap Protection and carrying
Insta360 GPS Action Remote Image, light, audio or remote control
Insta360 Back Bar Mounting
Insta360 Bullet Time Accessory Selfie stick, grip or tripod shots
Insta360 Motorcycle Kit Complete activity kit

Buying Insta360 ONE RS Accessories in Pakistan

  • Accessories with a price on our website can be ordered directly online. After you order, our team will call or WhatsApp you to confirm the exact item and price before delivery.
  • For accessories without a price, message us directly on WhatsApp. There is no need to place an order on the website for these items.

Related collections

Frequently asked questions

What is the price of Insta360 ONE RS Accessories in Pakistan?

Prices can change with stock and the exchange rate. Models with a price can be ordered directly on our website, and our team will call or WhatsApp you to confirm your order. For models without a price, message us on WhatsApp at +92 300 2506005 for today's price.

Do these accessories fit the Insta360 ONE RS?

Yes. Every accessory in this collection is made for the Insta360 ONE RS or names it in its official Insta360 compatibility list. Some mounts need an extra Insta360 mount or adapter for this camera; the note on the product page says which. The Compatibility row on each product page shows the full list of cameras it fits.

Do they fit the ONE RS 1 Inch 360 Edition?

Only the products whose compatibility list names the ONE RS 1 Inch 360 Edition. Most items here list the ONE RS Twin and 4K Editions, so check the Compatibility row on each product page first.

Do you also sell the Insta360 ONE RS?
Do you deliver Insta360 ONE RS Accessories all over Pakistan?

Yes. Free delivery all over Pakistan. In-stock orders usually arrive within 3 to 5 working days after order confirmation. See our Shipping Policy.

Which payment methods can I use?

Cash on Delivery, credit/debit card, bank transfer, JazzCash and Easypaisa.

Are the products genuine and do they have a warranty?

Every product sold by Lens Ground is 100% genuine. Warranty depends on the product and is confirmed with your order. See our Warranty Terms.

© 2026 Lens Ground