Insta360 GO 2 Accessories

50 products

  • Insta360 Chest Strap Price in Pakistan - Lens Ground

    Insta360 Insta360 Chest Strap

    Insta360 Chest Strap Key Specifications Capture epic first person shots completely hands free Adjustable and comfortable non slip design Supports cameras up to 250g (8.8oz) Includes a mount extension, 1/4" mount adapter and thumb screws Product Description The Insta360 Chest Strap is a wearable chest mount for Insta360 360 cameras and action cameras that captures immersive first person POV footage. Hands free first person shots Wear your camera on your chest to film cycling, hiking and other adventures from your own point of view while keeping both hands free. Adjustable and comfortable The adjustable, non slip strap design stays comfortable and secure as you move. Mounting notes GO 3S and GO 3 must be assembled with the Quick Release Mount, GO 2 with the Action Mount Adapter, and GO Ultra requires a 3 Prong to 1/4" Adapter, GO Ultra Magnetic Mount or Action Mount. Technical Specifications Product Insta360 Chest Strap Maximum Camera Weight 250g (8.8oz) Compatibility Insta360 X6, X5, X4 Air, X4, X3, GO Ultra, GO 3S, GO 3, GO 2, Ace Pro 2, Ace Pro, Ace, ONE RS (Twin/4K), ONE X2, ONE R In the Box 1 x Chest Strap 1 x Mount Extension 1 x 1/4" Mount Adapter 2 x Thumb Screws Available Configurations Chest Strap Frequently Asked Questions Does it work with GO 3S or GO Ultra? Yes. GO 3S and GO 3 must be assembled with the Quick Release Mount. GO Ultra requires a 3 Prong to 1/4" Adapter, GO Ultra Magnetic Mount or Action Mount. Can I quickly swap my Ace series camera to other mounts? Insta360 suggests the Standard Mount for Insta360 Ace Series to switch the camera from the Chest Strap to other mounts in seconds.

    Price on WhatsApp

  • Insta360 Head Strap Price in Pakistan - Lens Ground

    Insta360 Insta360 Head Strap

    Insta360 Head Strap Key Specifications Capture epic first person shots hands free Comfortable and adjustable non slip design Mount up to two cameras to record more of the action Includes a mount extension, 1/4" mount adapter and thumb screws Product Description The Insta360 Head Strap is a wearable head mount for Insta360 360 cameras and action cameras that captures immersive first person POV footage. Hands free first person shots Wear your camera on your head to film from your own point of view while keeping your hands free. Two cameras, more of the action Mount up to two cameras on the strap to record more of the action at the same time. Comfortable and adjustable The adjustable, non slip design stays comfortable and secure during activity. Technical Specifications Product Insta360 Head Strap Camera Mounts Up to two cameras Compatibility Insta360 X6, X5, X4 Air, X4, X3, GO Ultra, GO 3S, GO 3, GO 2, Ace Pro 2, Ace Pro, Ace, ONE RS (Twin/4K), ONE X2, ONE R Note GO 3S and GO 3 need the Quick Release Mount; GO 2 needs the Action Mount Adapter; GO Ultra needs a 3 Prong to 1/4" Adapter, GO Ultra Magnetic Mount or Action Mount In the Box 1 x Head Strap 1 x Mount Extension 1 x 1/4" Mount Adapter 2 x Thumb Screws Available Configurations Head Strap Frequently Asked Questions Can I mount two cameras? Yes. The Head Strap can hold up to two cameras to record more of the action. Does it work with GO 3S or GO Ultra? Yes. GO 3S and GO 3 must be assembled with the Quick Release Mount. GO Ultra requires a 3 Prong to 1/4" Adapter, GO Ultra Magnetic Mount or Action Mount.

    Price on WhatsApp

  • Insta360 Magnetic Selfie Stick Holster Price in Pakistan - Lens Ground

    Insta360 Insta360 Magnetic Selfie Stick Holster

    Insta360 Magnetic Selfie Stick Holster Key Specifications Magnetic holster for easy access to your camera and selfie stick Attaches to a backpack strap or waist belt for hands free carrying Simple to detach and record instantly Twist to adjust the direction of the selfie stick Non slip rubber pad protects your strap or belt Weight: 161g (5.7oz) Product Description The Insta360 Magnetic Selfie Stick Holster is a selfie stick accessory that gives easy access to your camera and selfie stick, suitable for scenarios such as hiking and diving. Say hello to hands free Easy to attach to a backpack strap or waist belt, so you can go hands free. In a hurry? No problem No delays when you want to start shooting. It is simple to detach and record instantly. Holds the camera tightly in place A super stable mounting position with a non slip rubber pad protects your backpack strap or belt from wear and tear. Shoot freely from the mountains to the oceans Hands free shooting and storage for hiking, diving and more. Attach it to your backpack strap or waist belt by adjusting the direction of the selfie stick. Technical Specifications Product Insta360 Magnetic Selfie Stick Holster Weight 161g (5.7oz) Dimensions 94 x 52.3 x 40mm (3.7 x 2.1 x 1.6in) Materials Aluminum alloy, stainless steel, nylon, magnetic metal Maximum Strap Width 6.5cm Compatibility Selfie sticks used with Insta360 X6, X5, X4 Air, X4, X3, GO Ultra, GO 3S, GO 3, GO 2, Ace Pro 2, Ace Pro, Ace, ONE RS (Twin/4K), ONE X2, ONE R, ONE X In the Box 1 x Selfie Stick Holster 1 x Quick Release 1 x L Shaped Wrench 1 x User Manual Available Configurations Magnetic Selfie Stick Holster Frequently Asked Questions Does it work with the Extended Edition Selfie Stick? No. The Insta360 Extended Edition Selfie Stick (3m) is not supported due to its length. Who should not use it? Because of its magnetism, do not use this accessory if you have a pacemaker. Also avoid using it in high risk sports such as skydiving, paragliding and wingsuit flying. How wide can my strap be? The maximum strap width is 6.5cm. The thickness and width of the strap affect how secure the holster is.

    Price on WhatsApp

  • Insta360 Monkey Tail Mount Price in Pakistan - Lens Ground

    Insta360 Insta360 Monkey Tail Mount

    Insta360 Monkey Tail Mount Key Specifications Bends any way you like and wraps around a variety of objects Can be used as a selfie stick with a one handed grip Lightweight, highly portable and easy to fold away and store Create the shape you want for endless mounting possibilities Ace Pro 2, Ace Pro and Ace need the Quick Release Mount or 3 Prong to 1/4" Adapter (sold separately) Product Description The Insta360 Monkey Tail Mount is a flexible camera mount for Insta360 360 cameras, action cameras and more. Wrap it around almost anything Bend it any way you like and wrap it around a variety of objects to create the shape you want, for endless mounting possibilities. A handy selfie stick It can also be used as a selfie stick with a one handed grip. Easy to carry Lightweight and highly portable, the Monkey Tail Mount folds away easily for storage. Technical Specifications Product Insta360 Monkey Tail Mount Type Flexible, bendable mount Compatibility Insta360 X6, X5, X4 Air, X4, X3, GO Ultra, GO 3S, GO 3, GO 2, Ace Pro 2, Ace Pro, Ace, ONE RS (Twin/4K), ONE X2, ONE R, ONE X, Luna Ultra, Link 2, Link 2C, Link Note Ace Pro 2, Ace Pro and Ace require the Quick Release Mount or 3 Prong to 1/4" Adapter, sold separately In the Box 1 x Monkey Tail Mount Available Configurations Monkey Tail Mount Frequently Asked Questions Does it work with Insta360 Ace Pro 2? Yes. With Ace Pro 2, Ace Pro or Ace you need the Quick Release Mount or the 3 Prong to 1/4" Adapter, sold separately. Can I use it as a selfie stick? Yes. The Monkey Tail Mount can be used as a selfie stick with a one handed grip.

    Price on WhatsApp

  • Insta360 Motorcycle U Bolt Mount Price in Pakistan Standard Upgrade - Lens Ground

    Insta360 Insta360 Motorcycle U Bolt Mount

    Insta360 Motorcycle U Bolt Mount Key Specifications A stabler, reliable design for onboard motorcycle shots New patented gimbal structure for more stable shots U bolt with large and small spacers fits mainstream motorcycles Use with the Insta360 Action Invisible Selfie Stick for third person views Two versions: Standard Upgrade and Enhanced Selfie Stick Kit Compatible with Insta360 X6, X5, X4 Air, X4, X3, GO Ultra, Ace Pro 2, Ace Pro, Ace, ONE RS (Twin/4K), GO 2, ONE X2, ONE R and ONE X Product Description The Insta360 Motorcycle U Bolt Mount is a motorcycle camera mount with a stabler, reliable design for onboard shots. It installs onto the motorcycle frame, rear pedal bracket, bumper and other secure areas. Third person views Use it with the Insta360 Action Invisible Selfie Stick to unlock third person shots of your ride. All new structure A refreshed design with a new, patented gimbal structure gives more stability to your motorcycle shots. Wider compatibility The mount adopts a U bolt. Use the two spacers to adapt the mount to mainstream motorcycles. Technical Specifications Product Insta360 Motorcycle U Bolt Mount Mounting U bolt with large and small spacers Joint Universal joint with patented gimbal structure Interface Thumb screw and 3 Prong to 1/4" adapter Recommended Use Smooth roads at speeds not over 80km/h (50mph); off road riding not supported Compatibility Insta360 X6, X5, X4 Air, X4, X3, GO Ultra, Ace Pro 2, Ace Pro, Ace, ONE RS (Twin/4K), GO 2, ONE X2, ONE R, ONE X In the Box Standard Upgrade: 1 x Universal Joint 1 x U Bolt 1 x Wrench 1 x Hex Wrench 1 x Large Spacer 1 x Small Spacer 2 x Rubber Pad 2 x Washer Pairs 1 x Thumb Screw 1 x 3 Prong to 1/4" Adapter 4 x Anti Slip Ring Enhanced Selfie Stick Kit: the Motorcycle U Bolt Mount set together with an Insta360 selfie stick, as shown in the kit image. Available Configurations Standard Upgrade Enhanced Selfie Stick Kit Frequently Asked Questions Where can I install the U bolt? On the motorcycle frame, rear pedal bracket, bumper and other secure areas. Install the spacer inside the U bolt based on the clamping position and size, and check that the U bolt is locked in place without rotation or play. Which selfie stick should I use with it? Insta360 recommends only the Action Invisible Selfie Stick. Do not attach other accessories to the mount or stick. The mount is not compatible with the Insta360 Extended Edition Selfie Stick. Can I ride off road with it? No. Riding is only recommended on smooth roads at speeds not over 80km/h (50mph).

    Price on WhatsApp

  • Insta360 Helmet Mount Kit Price in Pakistan - Lens Ground

    Insta360 Insta360 Helmet Mount Kit

    Insta360 Helmet Mount Kit Key Specifications Camera mount for motorcycling, MTB, skiing or any sport that uses a helmet Mount anywhere on your helmet: side, chin or top Straight and curved adhesive bases 360 shots automatically remove the extension for drone like perspectives Safety tether for extra security Compatible with Insta360 X6, X5, X4 Air, X4, X3, GO Ultra, GO 3S, GO 3, GO 2, Ace Pro 2, Ace Pro, Ace, ONE RS (Twin/4K), ONE X2, ONE R, ONE X and ONE Product Description The Insta360 Helmet Mount Kit is a helmet camera mount kit for unique 360 degree perspectives. Use it for motorcycling, MTB, skiing or any sport that uses a helmet. Mount anywhere on your helmet Fix the camera as a side mount, chin mount or top mount. With a 360 camera, the extension is automatically removed from the shot for drone like perspectives. Designed for your helmet Mount with either a straight or a curved base, depending on the shape of the helmet. Camera notes GO 3 and GO 3S must be assembled with the Quick Release Mount. GO 2 must be assembled with the Action Mount Adapter. GO Ultra needs the GO Ultra Quick Release Mount, sold separately. Technical Specifications Product Insta360 Helmet Mount Kit Mounting Positions Side mount, chin mount, top mount Bases Straight and curved 3M adhesive bases Application Motorcycling, MTB, skiing and other helmet sports Compatibility Insta360 X6, X5, X4 Air, X4, X3, GO Ultra, GO 3S, GO 3, GO 2, Ace Pro 2, Ace Pro, Ace, ONE RS (Twin/4K), ONE X2, ONE R, ONE X, ONE In the Box Helmet mounts with straight and curved 3M adhesive bases, mounting screws, adapters and safety tethers, as shown in the official kit image Available Configurations Helmet Mount Kit Frequently Asked Questions How do I get a firm seal on my helmet? Stick the 3M sticker to a clean, dry and smooth surface at room temperature 24 hours in advance. If needed, double up on 3M stickers. Can I use it on a matte helmet? Insta360 says that if the helmet surface is matte, do not use this product in strong winds. What if my camera has a threaded base? Use a 1/4 screw adapter. After mounting, use the safety tether in case you drop the camera.

    Price on WhatsApp

  • Insta360 Selfie Stick Wrist Strap Price in Pakistan - Lens Ground

    Insta360 Insta360 Selfie Stick Wrist Strap

    Insta360 Selfie Stick Wrist Strap Key Specifications Keeps your selfie stick secure and protected from accidental drops Includes the Standard Strap and the Adjustable Strap Standard Strap is comfortable and suited to casual use Adjustable Strap is suited to high intensity sports Attaches to the 1/4" mounting point at the bottom of the selfie stick Product Description The Insta360 Selfie Stick Wrist Strap is a selfie stick accessory that keeps your selfie stick in sight and out of mind. Comfortable and secure The Standard Strap is comfortable and suitable for casual use when you still need your hands free. The Adjustable Strap is suitable for high intensity sports, keeping the selfie stick securely fastened to your wrist. Technical Specifications Product Insta360 Selfie Stick Wrist Strap Length (Standard Strap) 184mm (7.3in) Width (Standard Strap) 20mm (0.78in) Weight (Standard Strap) 13g (0.45oz) Length (Adjustable Strap) 184mm (7.3in) Width (Adjustable Strap) 4mm (0.15in) Weight (Adjustable Strap) 8g (0.28oz) Compatibility Insta360 selfie sticks used with Insta360 X6, X5, X4 Air, X4, X3, GO Ultra, GO 3S, GO 3, GO 2, Ace Pro 2, Ace Pro, Ace, ONE RS (Twin/4K), ONE X2, ONE R, ONE X, ONE In the Box 1 x Standard Strap 1 x Adjustable Strap Available Configurations Selfie Stick Wrist Strap Frequently Asked Questions How do I install the wrist strap? Screw the 1/4" screw on the wrist strap into the 1/4" mounting point at the bottom of the selfie stick, then slide your hand through the strap. With the Adjustable Strap, adjust the length until it feels secure around your wrist. What if the strap feels loose? Make sure the wrist strap is tightly screwed into the selfie stick, and retighten it if it feels loose.

    Price on WhatsApp

  • Insta360 Bike Computer Mount Price in Pakistan Independent Handlebars Pro - Lens Ground

    Insta360 Insta360 Bike Computer Mount

    Insta360 Bike Computer Mount Key Specifications Versions for independent and integrated handlebars Mounts an Insta360 camera, bike light and bike computer together Comes with a 1/4" screw, 3 prong mount and bike computer base Works with Garmin, Wahoo, Bryton, Giant and other bike computers High strength aluminum, maximum load 500g (17.6oz) Product Description The Insta360 Bike Computer Mount is the official Insta360 bike mount that keeps your camera, light and bike computer in one place on your handlebars. Fresh perspectives Explore dynamic angles with third person footage or thrilling POVs. Keep it tidy Mount your camera, light and bike computer in one place and keep your handlebars clutter free. X6 attaches to the mount directly through its 1/4" mounting point, with no L shaped bracket needed. Built to last High strength aluminum gives reliable stability on every ride. Custom fit Available for both integrated and independent handlebars. Technical Specifications Brand Insta360 Compatibility Insta360 X6, X5, X4 Air, X4, X3, ONE X2, ONE RS, ONE RS Twin and 4K, ONE R, ONE X, GO Ultra, GO 3S, GO 3, GO 2, Ace Pro 2, Ace Pro and Ace Material High strength aluminum Maximum load 500g (17.6oz) Interfaces 1/4" screw, 3 prong mount, bike computer base Bike computers Garmin, Wahoo, Bryton, Giant and more Recommended speed Within 60km/h (37mph) on flat roads In the Box 1x Insta360 Bike Computer Mount with 1/4" screw, 3 prong mount and bike computer base Available Configurations Independent Handlebars Pro Integrated Handlebars Pro Integrated Handlebars Frequently Asked Questions Which version should I choose? Choose Independent Handlebars Pro for a separate stem and handlebar, or one of the Integrated Handlebars versions for one piece cockpits. Can I mount a selfie stick on it? No. Mount the camera directly. The maximum load is 500g (17.6oz). Is it suitable for rough roads? Insta360 recommends staying within 60km/h on flat roads and does not recommend it for bumpy roads.

    Price on WhatsApp

  • Insta360 Motorcycle Kit Price in Pakistan Standard Upgrade - Lens Ground

    Insta360 Insta360 Motorcycle Kit

    Insta360 Motorcycle Kit Key Specifications All new universal Heavy Duty Clamp for handlebars, bumpers and more No ball joint design for stabler shots Flexible Adhesive Mount designed for curved surfaces such as helmets, fuel tanks and windshields Clamp fits round tubes from 17 to 37mm (0.6 to 1.5in) in diameter Heavy Duty Clamp Mount weight: 272g (9.6oz) Optional kit with Action Invisible Selfie Stick (extended length up to 100cm) Product Description The Insta360 Motorcycle Kit is a camera mount kit that captures your best rides safely. It works with Insta360 360 cameras and action cameras. New Heavy Duty Clamp, seriously sturdy A powerful clamp you can depend on, with an all new design and no ball joint for stabler shots. It securely fixes your camera to handlebars, bumpers and more. Flexible adhesive mount for even more options Designed for curved surfaces and guaranteed to stick, the Flexible Adhesive Mount fits on your helmet, fuel tank or windshield, unlocking even more shooting angles. With Invisible Selfie Stick The With Invisible Selfie Stick configuration adds the Action Invisible Selfie Stick, which can be mounted on the Heavy Duty Clamp using its 1/4" screw and extended up to 100cm for third person riding shots on smooth roads. Technical Specifications Product Insta360 Motorcycle Kit Weight (Heavy Duty Clamp Mount) 272g (9.6oz) Dimensions (Heavy Duty Clamp Mount) 124 x 73 x 53mm (4.9 x 2.9 x 2.0in) Weight (Flexible Adhesive Mount) 40g (1.4oz) Dimensions (Flexible Adhesive Mount) 66.5 x 66.5 x 48mm (2.6 x 2.6 x 1.9in) Clamp Tube Diameter 17 to 37mm (0.6 to 1.5in) Compatibility Insta360 X6, X5, X4 Air, X4, X3, GO Ultra, GO 3S, GO 3, GO 2, Ace Pro 2, Ace Pro, Ace, ONE RS (Twin/4K), ONE X2, ONE R, ONE X, ONE In the Box 1 x Heavy Duty Clamp Mount 2 x Flexible Adhesive Mount (with 3M stickers) 8 x Anti slip Ring 1 x Hex Wrench 2 x 1/4" to 2 Prong Adapter 1 x 1/4" Camera Mount Adapter 3 x Thumb Screw 1 x Clamp Mount Wrench With Invisible Selfie Stick: also includes the Action Invisible Selfie Stick Available Configurations Standard Upgrade With Invisible Selfie Stick Frequently Asked Questions Which handlebars does the Heavy Duty Clamp fit? It is for round tubes such as handlebars or bumpers with a diameter of 17 to 37mm (0.6 to 1.5in). Do not attach it to irregularly shaped objects. Can I use a selfie stick on the Heavy Duty Clamp? Only the official Insta360 Action Invisible Selfie Stick, extended to 100cm or less, connected through the 1/4" screw on the clamp. Mount the selfie stick only when riding on smooth roads and tighten the mount with the included wrench. How fast can I ride with the camera on the clamp? With the camera mounted directly on the Heavy Duty Clamp, Insta360 advises not exceeding 80km/h on smooth roads or 40km/h off road. How do I use the Flexible Adhesive Mount? Clean and dry the surface, press and hold the mount for 30 seconds, and wait at least 24 hours before attaching a camera. A detached adhesive base cannot be reused, and this mount cannot be used with selfie sticks.

    Price on WhatsApp

  • Insta360 Snow Kit Price in Pakistan - Lens Ground

    Insta360 Insta360 Snow Kit

    Insta360 Snow Kit Key Specifications Includes Chest Strap, Helmet Extension Rod, Flexible Adhesive Mounts and mounting parts Upgraded Chest Strap fits comfortably on the body with increased stability Rotatable chest mounting base for horizontal and vertical shooting Flexible Adhesive Mount with a strong 3M adhesive base fits tightly on a helmet Carbon fiber Helmet Extension Rod for third person perspectives Compatible with Insta360 X6, X5, X4 Air, X4, X3, Ace Pro 2, Ace Pro, Ace, ONE RS (Twin/4K), ONE X2, ONE R, ONE X, ONE and GO 2 Product Description The Insta360 Snow Kit is a camera mount kit that levels up your winter sports shots with unique perspectives. It brings together a chest strap, a helmet extension rod, flexible adhesive mounts and mounting parts, so you can capture POVs of your days on the slopes. Ultimate hands free POVs The Chest Strap is comfortable, adjustable and perfect for first person perspectives and scenic views. A rotatable mounting base means you can freely switch between horizontal and vertical shooting. Flexible design for creative angles The Flexible Adhesive Mount fits perfectly on your helmet and has a strong 3M adhesive base for extra security. Epic third person perspectives The carbon fiber Helmet Extension Rod gives unique perspectives of the action. Mount it to your helmet and move with ease. Technical Specifications Product Insta360 Snow Kit Material (Flexible Adhesive Base) Thermoplastic polyurethane rubber, plastic, stainless steel Weight (Flexible Adhesive Base) 40.0g (1.41oz) Size (Flexible Adhesive Base) 66.5 x 66.5 x 48mm (2.6 x 2.6 x 1.9in) Material (Chest Strap) Fabric, plastic and stainless steel Weight (Chest Strap) 207g (7.3oz) Size (Chest Strap) 33.6 x 24.3 x 6cm (13.2 x 9.6 x 2.4in) Compatibility Insta360 X6, X5, X4 Air, X4, X3, Ace Pro 2, Ace Pro, Ace, ONE RS (Twin/4K), ONE X2, ONE R, ONE X, ONE, GO 2 In the Box 1 x Helmet Extension Rod with Fixing Nut 1 x Chest Strap 5 x 1/4" Thumb Screw Wrench 4 x Stabilizer Rings 1 x Adapter 1 x 1/4" to 3 Prong Adapter 3 x 1/4" to 2 Prong Adapter 2 x Flexible Adhesive Bases 2 x Cleaning Wipes Available Configurations Standard Upgrade Frequently Asked Questions Where should I stick the Flexible Adhesive Mount for skiing? Insta360 recommends sticking the Flexible Adhesive Mount to the helmet. On any other surface, connect it directly to the camera and do not use selfie sticks or extensions. How do I get a strong hold with the adhesive base? Clean the surface with a cleaning wipe so it is clean, dry and smooth, press and hold the mount for 30 seconds after sticking, and wait at least 24 hours before using it. A base that detaches cannot be reused. Why is the name on the packaging different? The product name on the packaging may vary slightly, but the contents are as listed in the box.

    Price on WhatsApp

  • Insta360 Mini 2 in 1 Tripod Price in Pakistan - Lens Ground

    Insta360 Insta360 Mini 2 in 1 Tripod

    Insta360 Mini 2 in 1 Tripod Key Specifications Tripod and selfie stick all in one Small and lightweight at 92g (3.25oz) Magnetically fastening legs for convenient use Universal interface with a 1/4" mount for action cameras and webcams Can be used as a desk mount for Insta360 Link Maximum camera weight: 250g Product Description The Insta360 Mini 2 in 1 Tripod is a small tripod with big potential. It switches from a tripod to a selfie stick, so you can shoot with more variety without any hassle. Small but sturdy The compact design is made for shooting on the go. Cross compatible A universal interface and a 1/4" mount work with your action cameras and webcams, including Insta360 Link as a desk mount. GO Ultra support To use this accessory with GO Ultra, the GO Ultra Quick Release Mount is needed and sold separately. Technical Specifications Product Insta360 Mini 2 in 1 Tripod Materials Polycarbonate (PC), ABS, thermoplastic polyurethane (TPU), aluminum Weight 92g (3.25oz) Dimensions 162 x 29 x 29mm (6.38 x 1.14 x 1.14in) Maximum Camera Weight 250g Compatibility Insta360 X6, X5, X4 Air, X4, X3, Luna Ultra, GO Ultra, GO 3S, GO 3, GO 2, Ace Pro 2, Ace Pro, Ace, Link 2, Link 2C, Link, ONE RS 1 Inch 360 Edition, ONE RS (Twin/4K), ONE R, ONE X2, ONE X In the Box 1 x Mini 2 in 1 Tripod 2 x Locking Lever 1 x 1/4" Mount Adapter 1 x Manual Available Configurations Mini 2-in-1 Tripod Frequently Asked Questions How heavy a camera can the Mini 2 in 1 Tripod hold? The maximum camera weight should not exceed 250g. A heavier camera may tip the tripod over. Can I use it outdoors? Yes, but place it securely on level ground, do not extend it too high, and take care in windy weather. Remove the camera before moving the tripod. Is there a newer version? Yes. The Mini 2 in 1 Tripod 2.0 is listed separately.

    Price on WhatsApp

  • Insta360 Rear View Mirror Mount Price in Pakistan - Lens Ground

    Insta360 Insta360 Rear View Mirror Mount

    Insta360 Rear View Mirror Mount Key Specifications Mounts on the rear view mirror of scooters and motorcycles Captures epic third person POV shots on road trips Fits mirror rods with a diameter of 6 to 15mm using the included clamps Fully adjustable clamp and base design Super lightweight and compact: 82.6g (2.91oz) Product Description The Insta360 Rear View Mirror Mount is a camera mount for motorized capture on the go. It works with Insta360 360 cameras and action cameras on scooters and motorcycles. More angles and positions Easily capture epic third person POV shots on your road trips and adjust on the go. Adjustable clamps for convenient mounting Fits handlebars and mirror rods with a diameter range of 6 to 15mm, with five clamp sizes included. Flexible new design for more options The fully adjustable base design lets you capture your ride the way you want. Easy to use Super lightweight and compact, it mounts easily on scooters and motorcycles. Technical Specifications Product Insta360 Rear View Mirror Mount Material Plastic, stainless steel Weight 82.6g (2.91oz) Size 40.2 x 48.5 x 89mm (1.6 x 1.9 x 3.5in) Clamp Range 6 to 15mm Compatibility Insta360 X6, X5, X4 Air, X4, X3, GO Ultra, GO 3S, GO 3, GO 2, Ace Pro 2, Ace Pro, Ace, ONE RS (Twin/4K), ONE X2, ONE R, ONE X, ONE In the Box 1 x Rear View Mirror Mount 1 x 6mm Clamp 1 x 8mm Clamp 1 x 10mm Clamp 1 x 12mm Clamp 1 x 14mm Clamp 4 x Anti Slip Rings 1 x Hex Wrench 1 x Thumb Screw 1 x 3 Prong to 1/4" Adapter Available Configurations Rear View Mirror Mount Frequently Asked Questions What rod sizes does it fit? The mount clamps rods from 6 to 15mm. Select the appropriately sized clamp and do not force an incorrect size, as this will damage the product. Can I attach a selfie stick to it? No. The Rear View Mirror Mount is designed solely for connecting a camera and cannot be used with selfie sticks or extension rods. Is there a speed limit? Avoid rugged off road conditions. On regular roads, Insta360 advises keeping your speed below 80km/h (50mph), and always secure the mount before riding.

    Price on WhatsApp

  • Insta360 Throwpod Price in Pakistan - Lens Ground

    Insta360 Insta360 Throwpod

    Insta360 Throwpod Key Specifications Super stable two in one tripod and selfie stick Legs automatically unfold when the tripod hits the ground: simply drop and shoot Extends to 1.1m for high angle shots and better composition Sturdy triangle base expands to 50cm for full support outdoors Universal 1/4" mounting point Compatibility: Insta360 X6, X5, X4, X3, GO Ultra, GO 3S, GO 3, GO 2, Ace Pro 2, Ace Pro, Ace, Luna Ultra, Flow 2 Series, Flow Pro, Flow, ONE RS, ONE X2, ONE R, ONE X and ONE Product Description The Insta360 Throwpod: stop, drop and roll. Drop it and shoot The tripod automatically unfolds when it hits the ground, so you can start shooting in an instant. In the heights A built in selfie stick extends to 1.1m for high angle shots and perfect composition, ideal for photography and travel. Not blowing in the wind The sturdy triangle base expands to 50cm for full support in the great outdoors. Risk the shot, not the camera. Think of the possibilities A universal 1/4" mounting point gives versatile mounting options. Technical Specifications Product Throwpod Maximum Length 1.1m Base Span 50cm Legs Automatically unfold on ground contact Mount Universal 1/4" Compatibility Insta360 X6, X5, X4, X3, GO Ultra, GO 3S, GO 3, GO 2, Ace Pro 2, Ace Pro, Ace, Luna Ultra, Flow 2 Series, Flow Pro, Flow, ONE RS (Twin/4K), ONE X2, ONE R, ONE X, ONE In the Box 1 x Throwpod Available Configurations Throwpod Frequently Asked Questions How do the legs open? They unfold automatically when the tripod hits the ground, so you can drop it and shoot. How long does it extend? The built in selfie stick extends to 1.1m. Which devices does it fit? Any device with a 1/4" mount; Insta360 lists the X, GO, Ace, Luna, Flow and ONE series as compatible.

    Price on WhatsApp

  • Insta360 Hand Mount Kit Price in Pakistan - Lens Ground

    Insta360 Insta360 Hand Mount Kit

    Insta360 Hand Mount Kit Key Specifications Flexible action mount for use on the hand or wrist Rotate the camera 360 degrees or tilt it up and down without removing it from the mount Comfortable on land and in the sea Adjustable size with a widened wrist strap for increased stability Includes Wrist Strap, Hand Strap, Mount, 1/4" Thumb Screw and 1/4" Camera Mount Adapter Compatible with Insta360 X6, X5, X4 Air, X4, X3, GO Ultra, GO 3S, GO 2, Ace Pro 2, Ace Pro, Ace, ONE RS (Twin/4K), ONE X2, ONE R and ONE X Product Description The Insta360 Hand Mount Kit is a flexible camera mount for the hand or wrist. It frees your hands for immersive action shooting and is perfect for action sports or for capturing an alternative view. First person shooting makes it easy to capture the world around you. Any camera, any angle Rotate the camera 360 degrees, or tilt it up and down, without removing it from the mount. It works with multiple Insta360 cameras. Comfortable on land and sea Use it for skateboarding on land or take it into the water for a different view. Adjustable fit The adjustable size gives a perfect fit, and the widened wrist strap increases stability. If the Hand Strap is too long, cut off any excess Velcro until you get a good fit. How to use the Hand Strap Pass the Hand Strap through the holes on the Mount, position the Mount on your hand and fasten the Velcro straps, then install the camera. Hold the screw and rotate the turntable on the Mount to adjust the direction of the camera. Technical Specifications Product Insta360 Hand Mount Kit Wear Position Hand or wrist Mount Rotation 360 degree rotation with up and down tilt Fastening Velcro straps Mounting 1/4" thumb screw and 1/4" camera mount adapter Compatibility Insta360 X6, X5, X4 Air, X4, X3, GO Ultra, GO 3S, GO 2, Ace Pro 2, Ace Pro, Ace, ONE RS (Twin/4K), ONE X2, ONE R, ONE X In the Box 1 x Wrist Strap 1 x Hand Strap 1 x Mount 1 x 1/4" Thumb Screw 1 x 1/4" Camera Mount Adapter Available Configurations Hand Mount Kit Frequently Asked Questions Can I use the Hand Mount Kit with GO 3 or GO 3S? Yes. Insta360 says GO 3 must be assembled with the Quick Release Mount. GO 2 must be used with a Mount Adapter. Can I wear it on my wrist and on my hand? Yes. The kit includes both a Wrist Strap and a Hand Strap, so you can choose the position that suits your activity.

    Price on WhatsApp

  • Insta360 Bike Tail Mount Kit Price in Pakistan - Lens Ground

    Insta360 Insta360 Bike Tail Mount Kit

    Insta360 Bike Tail Mount Kit Key Specifications Upgraded tail mount kit for third person cycling shots Mount below the seat or build a full third person setup Dual clamps and multiple clamping points for stability Gimbal inspired angle adjustment Designed for road bikes Product Description The Insta360 Bike Tail Mount Kit is the official Insta360 bike mount kit for recording your ride from behind, drone free. Record your ride With an Insta360 360° action cam and an Invisible Selfie Stick, you get an immersive third person view of your ride. Dual clamps, max stability The design mounts below the seat and at your bicycle's tail. Flexible angles A gimbal inspired design lets you adjust the shot angle freely, and it switches easily via the Bike Seat Rail Mount for below seat or full third person shots. Technical Specifications Brand Insta360 Compatibility Insta360 X6, X5, X4 Air, X4, X3, ONE X2, ONE RS, ONE RS Twin and 4K, ONE R, ONE X, GO Ultra, GO 3S, GO 3, GO 2, Ace Pro 2, Ace Pro and Ace Designed for Road bikes Clamping Main clamp, two clamp brackets and support clamp Note Check the fit with your seat post and add a silicone pad if needed In the Box 1x Bike Tail Mount Main Clamp 1x Bike Tail Mount Clamp Bracket A 1x Bike Tail Mount Clamp Bracket B 1x Support Clamp 2x 55mm M5 Bolts 2x 44mm M5 Bolts 2x Silicone Pads 1x Bike Seat Rail Mount Clamp Bracket 1x Bike Seat Rail Mount Clamp 2x 16mm M4 Bolts 1x 1/4" to 2 Prong Adapter (Upgraded) 2x Thumb Screws 1x Hex Wrench 4x Anti Slip Rings Frequently Asked Questions Can I use the tail mount alone with a selfie stick? No. Insta360 says to use it with the Bike Seat Rail Support Clamp, not alone with a selfie stick and camera. Where can I use it? For safety it is only suitable for riding on flat roads, and the setup must not stick out wider than the handlebars.

    Price on WhatsApp

  • Insta360 Flexible Adhesive Mount Price in Pakistan - Lens Ground

    Insta360 Insta360 Flexible Adhesive Mount

    Insta360 Flexible Adhesive Mount Key Specifications Flexible design for flat and curved surfaces Strong 3M reinforced adhesive base Heat and humidity resistant Includes 2 Flexible Adhesive Mounts Comes with 1/4" to 2 Prong Adapters for other accessories Compatible with Insta360 X6, X5, X4 Air, X4, X3, Luna Ultra, GO Ultra, GO 3S, GO 3, GO 2, Ace Pro 2, Ace Pro, Ace, ONE RS (Twin/4K), ONE X2, ONE R and ONE X Product Description The Insta360 Flexible Adhesive Mount is an adhesive camera mount that unlocks more creative perspectives. Flexible design for creative angles Easily fit the mount to various surfaces, even curved ones such as fuel tanks, windshields and car hoods. Strong and stable The 3M reinforced adhesive mount is designed to stick even in challenging environments such as heat, humidity, wind and rain. Double the fun Two mounts are included for even more possibilities. Universal mounting Two 1/4" to 2 Prong Adapters let you use the mount with different accessories. GO 3 and GO 3S must be assembled with the Quick Release Mount. GO Ultra needs a GO Ultra Quick Release Mount or Action Mount. Technical Specifications Product Insta360 Flexible Adhesive Mount Adhesive 3M reinforced adhesive base Surfaces Flat and curved; smooth, clean surfaces such as glass, ceramic and plastic Quantity 2 mounts Compatibility Insta360 X6, X5, X4 Air, X4, X3, Luna Ultra, GO Ultra, GO 3S, GO 3, GO 2, Ace Pro 2, Ace Pro, Ace, ONE RS (Twin/4K), ONE X2, ONE R, ONE X In the Box 2 x Flexible Adhesive Mount 2 x 1/4" to 2 Prong Adapter Available Configurations Flexible Adhesive Mount Frequently Asked Questions Can I reuse the adhesive base? No. If the sticky base detaches from the surface, it cannot be reused. Clean the surface first, press for 30 seconds after sticking and wait at least 24 hours before use. Can I use a selfie stick with it? No. Insta360 says this product cannot be used with any selfie sticks.

    Price on WhatsApp

  • Insta360 Mini 2 in 1 Tripod 2.0 Price in Pakistan Mini 2-in-1 Tripod 2.0 - Lens Ground

    Insta360 Insta360 Mini 2 in 1 Tripod 2.0

    Insta360 Mini 2 in 1 Tripod 2.0 Key Specifications Official Insta360 product name: Mini 2-in-1 Tripod 2.0 All in one design: use it as a selfie stick or fold out the built in tripod 58.5cm selfie stick length Universal 3 Prong Adapter and 1/4" to 2 Prong Adapter Compatible with the Insta360 Mini Remote to start and stop recording Storage Cover holds up to two microSD cards Available in black and white, with Remote Kit and GO Ultra versions Product Description The Insta360 Mini 2 in 1 Tripod 2.0 is a small tripod with big potential and a new design, made for Insta360 360 cameras, action cameras and webcams. More variety, less hassle A simple all in one design lets you switch from the built in tripod to the 58.5cm selfie stick with ease. Small but sturdy The compact design is made for shooting on the go. Cross compatible A universal 3 Prong Adapter and a 1/4" to 2 Prong Adapter work with all your cameras and accessories. Control with a click It is compatible with the Insta360 Mini Remote, so you can start and stop recording with one click. The Mini Remote comes in the Remote Kit or can be bought separately. The tripod also includes a Storage Cover that can store up to two microSD cards. Usage notes With Insta360 GO Series cameras, the Mini Remote button can only wake up the standalone camera. With Insta360 X Series cameras, the Mini Remote Storage Cover on the handle may remain visible in 360 footage when the selfie stick is extended. Technical Specifications Product Mini 2-in-1 Tripod 2.0 Type Selfie stick with built in tripod Selfie Stick Length 58.5cm Adapters Universal 3 Prong Adapter, 1/4" to 2 Prong Adapter Remote Support Insta360 Mini Remote (included in Remote Kit) Storage Storage Cover for up to two microSD cards Colours Black, White Compatibility Insta360 X6, X5, X4 Air, GO Ultra, Ace Pro 2, X4, GO 3S, Link 2 Pro, Link 2C Pro, Link 2, Link 2C, Ace Pro, X3, Ace, GO 3, Link, ONE X, GO 2, ONE X2, ONE R, ONE RS (Twin/4K), ONE RS 1 Inch 360 Edition Remote Kit Compatibility Insta360 X6, X5, X4 Air, GO Ultra, Ace Pro 2, GO 3S In the Box Mini 2-in-1 Tripod 2.0 (Black or White): 1 x Mini 2-in-1 Tripod 2.0 Mini 2-in-1 Tripod 2.0 Remote Kit (Black or White): 1 x Mini 2-in-1 Tripod 2.0, 1 x Mini Remote For GO Ultra: 1 x Mini 2-in-1 Tripod 2.0, 1 x GO Ultra Quick Release Mount Available Configurations Mini 2-in-1 Tripod 2.0 Mini 2-in-1 Tripod 2.0 Remote Kit For GO Ultra - Mini 2-in-1 Tripod 2.0 + GO Ultra Quick Release Mount Mini 2-in-1 Tripod 2.0 White Mini 2-in-1 Tripod 2.0 Remote Kit White Frequently Asked Questions Can it be used as both a selfie stick and a tripod? Yes. It switches from the built in tripod to a 58.5cm selfie stick. Is the Mini Remote included? Only in the Remote Kit versions. The standard version is compatible with the Mini Remote, which can be bought separately. Which cameras does it work with? Insta360 lists the X6, X5, X4 Air, GO Ultra, Ace Pro 2, X4, GO 3S, Link series, Ace Pro, X3, Ace, GO 3, ONE X, GO 2, ONE X2, ONE R and ONE RS series.

    Price on WhatsApp

  • Insta360 All Purpose Tripod Price in Pakistan - Lens Ground

    Insta360 Insta360 All Purpose Tripod

    Insta360 All Purpose Tripod Key Specifications Seriously stable tripod with extendable legs Leg radius: 152mm collapsed, 232mm extended Material: aluminum alloy Weight: 187g; load capacity: 500g Top screw: 1/4" standard screw Works with Insta360 360 cameras, action cameras and Flow gimbals Product Description The Insta360 All Purpose Tripod is a compact camera tripod that is seriously stable thanks to its extendable legs. Pair it with a selfie stick for low angle and standing shots with your Insta360 camera, or use it with an Insta360 Flow gimbal. Extendable legs The legs extend from a 152mm radius to a 232mm radius for a wider, more stable base. Universal mount A 1/4" standard screw on top fits Insta360 cameras and accessories. With Ace Pro 2, Ace Pro or Ace, the Quick Release Mount or the 3 Prong to 1/4" Adapter is needed and sold separately. Technical Specifications Product Insta360 All Purpose Tripod Material Aluminum alloy Weight 187g Color Black Load Capacity 500g Top Screw 1/4" standard screw Radius (Legs Collapsed) 152mm Radius (Legs Extended) 232mm Compatibility Insta360 X6, X5, X4 Air, X4, X3, Luna Ultra, GO Ultra, GO 3S, GO 3, GO 2, Ace Pro 2, Ace Pro, Ace, Flow 2 Series, Flow Pro, Flow, ONE RS (Twin/4K), ONE RS 1 Inch 360 Edition, ONE X2, ONE R, ONE X, ONE In the Box 1 x All Purpose Tripod Available Configurations All-Purpose Tripod Frequently Asked Questions How much weight can the All Purpose Tripod hold? It has a load capacity of 500g. Can I use it with Ace Pro 2 or Ace Pro? Yes, with the Quick Release Mount or the 3 Prong to 1/4" Adapter, sold separately.

    Price on WhatsApp

  • Insta360 Heavy Duty Clamp Price in Pakistan - Lens Ground

    Insta360 Insta360 Heavy Duty Clamp

    Insta360 Heavy Duty Clamp Key Specifications Powerful universal clamp that securely fixes your camera to handlebars, bumpers and more All new design with no ball joint for stabler shots Fits round tubes from 17 to 37mm (0.67 to 1.46in) in diameter Aluminum alloy, zinc alloy, stainless steel and plastic build Weight: 272g (9.6oz) Same clamp as in the Insta360 Motorcycle Kit Product Description The Insta360 Heavy Duty Clamp is a camera clamp mount for stable, safe shots as you ride, the perfect companion for motorcyclists using Insta360 360 cameras and action cameras. A powerful, must have clamp for motorcyclists Mount your camera quickly on your handlebars and capture steady footage in seconds. Unquestionably secure and steady Designed without a ball joint, the Heavy Duty Clamp smooths out even the roughest rides and locks in the shooting angle for incredibly stable footage. Technical Specifications Product Insta360 Heavy Duty Clamp Materials Aluminum alloy, zinc alloy, stainless steel and plastic Weight 272g (9.6oz) Dimensions 124 x 73 x 53mm (4.9 x 2.9 x 2.0in) Tube Diameter 17 to 37mm (0.67 to 1.46in) Compatibility Insta360 X6, X5, X4 Air, X4, X3, GO Ultra, GO 3S, GO 3, GO 2, Ace Pro 2, Ace Pro, Ace, ONE RS (Twin/4K), ONE X2, ONE R, ONE X, ONE (GO 3S and GO 3 require the Quick Release Mount) In the Box 1 x Heavy Duty Clamp 4 x Anti Slip Rings 1 x Hex Wrench 1 x 3 Prong to 1/4" Adapter 1 x Thumb Screw 1 x Clamp Mount Wrench Available Configurations Heavy Duty Clamp Frequently Asked Questions What can I mount it on? Round tubes such as handlebars or bumpers with a diameter of 17 to 37mm. Do not attach it to irregularly shaped objects as there is a risk of detachment. On smooth metal tubes, tighten the clamp with the included wrench. Can I use a selfie stick with it? Only the Insta360 Action Invisible Selfie Stick, extended to 100cm or less and connected to the 1/4" screw on the clamp. Does it work with GO 3S or GO 3? Yes, but the Quick Release Mount is required to use the Heavy Duty Clamp with Insta360 GO 3S or GO 3.

    Price on WhatsApp

  • Insta360 Bike Seat Rail Mount Price in Pakistan - Lens Ground

    Insta360 Insta360 Bike Seat Rail Mount

    Insta360 Bike Seat Rail Mount Key Specifications Mounts on the bike seat rail for fresh angles Lightweight, high strength aluminium alloy 3 prong mount for all Insta360 action cameras Includes a 2 prong to 1/4" adapter Not for bikes with spring seats Product Description The Insta360 Bike Seat Rail Mount is the official Insta360 bike mount that shows your ride from a different perspective, mounted on your saddle's seat rail. Fresh new angles Leave the handlebar behind and capture your entire ride from the starting line to the final flag. Lightweight and heavy duty The lightweight chassis uses high strength aluminium alloy for strength and stability. Universal mount A 3 prong mount and the included 2 prong to 1/4" adapter give complete Insta360 action camera compatibility. Technical Specifications Brand Insta360 Compatibility Insta360 X6, X5, X4 Air, X4, X3, ONE X2, ONE RS, ONE RS Twin and 4K, ONE R, ONE X, GO Ultra, GO 3S, GO 3, GO 2, Ace Pro 2, Ace Pro and Ace Material High strength aluminium alloy Mount 3 prong, with 2 prong to 1/4" adapter Recommended speed Under 60km/h (37mph) on smooth roads, under 40km/h (25mph) on uneven roads In the Box 1x Insta360 Bike Seat Rail Mount with 2 prong to 1/4" adapter Frequently Asked Questions Does it work with X series cameras? Yes. On rough terrain Insta360 recommends combining it with an X Series Utility Frame, and not mounting the camera vertically. Does it fit every bike? It is not compatible with bicycles that use spring seats.

    Price on WhatsApp

  • Insta360 Selfie Stick Sleeve Price in Pakistan For 114cm/85cm Invisible Selfie Stick - Lens Ground

    Insta360 Insta360 Selfie Stick Sleeve

    Insta360 Selfie Stick Sleeve Key Specifications Comfortable silicone grip for easier handling of your selfie stick Ergonomic spindle shape for an easier grip over extended periods Durable and non slip design Two versions: for the 114cm/85cm Invisible Selfie Stick or the Action Invisible Selfie Stick Does not block the 1/4" screw interface on the bottom of the selfie stick Product Description The Insta360 Selfie Stick Sleeve is a selfie stick grip accessory that gives a comfortable hold for easier handling, making shooting easier. Proven comfortable The ergonomic design reduces strain over long periods of time. Durable and non slip design A grip that you will want on all of your selfie sticks. Slide the sleeve on from the top of the selfie stick (1/4" screw side), and pull it off upward from the same direction to remove it. Technical Specifications Product Insta360 Selfie Stick Sleeve Outer Diameter (for 114cm/85cm Invisible Selfie Stick) 32.5mm (1.3in) Inner Diameter (for 114cm/85cm Invisible Selfie Stick) 21.4mm (0.8in) Length (for 114cm/85cm Invisible Selfie Stick) 159mm (6.3in) Weight (for 114cm/85cm Invisible Selfie Stick) 53g (1.9oz) Outer Diameter (for Action Invisible Selfie Stick) 32.7mm (1.3in) Inner Diameter (for Action Invisible Selfie Stick) 23.1mm (0.9in) Length (for Action Invisible Selfie Stick) 148mm (5.8in) Weight (for Action Invisible Selfie Stick) 48g (1.7oz) Compatibility Invisible selfie sticks used with Insta360 X6, X5, X4 Air, X4, X3, GO Ultra, GO 3S, GO 3, GO 2, Ace Pro 2, Ace Pro, Ace, ONE RS 1 Inch 360 Edition, ONE RS (Twin/4K), ONE X2, ONE R, ONE X In the Box 1 x Selfie Stick Sleeve (for the selected selfie stick version) Available Configurations For 114cm/85cm Invisible Selfie Stick For Action Invisible Selfie Stick Frequently Asked Questions Which version should I choose? The sleeve comes in two versions, designed for either the Action Invisible Selfie Stick or the 114cm/85cm Invisible Selfie Stick. Select the one that matches your selfie stick for the best fit. Should I keep the sleeve on when the stick is not handheld? For scenarios where the selfie stick is not handheld, Insta360 recommends removing the sleeve for a better invisible effect in videos.

    Price on WhatsApp

  • Insta360 Suction Cup Car Mount Price in Pakistan Suction Cup Car Mount - Lens Ground

    Insta360 Insta360 Suction Cup Car Mount

    Insta360 Suction Cup Car Mount Key Specifications Double ball mount design for maximum adjustability Strong suction cup for a firm mount on a smooth, flat surface Tough, high strength aluminum alloy design Folds into a pocket sized package with a quick release wrench Dual and Triple Suction Cup Car Mount versions for third person car shots with the Action Invisible Selfie Stick Compatible with Insta360 X6, X5, X4 Air, X4, X3, Ace Pro 2, Ace Pro, Ace, GO 3S, GO 3, GO 2, ONE RS (Twin/4K), ONE X2, ONE R, ONE X and ONE Product Description The Insta360 Suction Cup Car Mount is a car camera mount that lets you shoot from any angle. Insta360 sells this single suction cup mount made by PGYTECH (model P-GM-132). It must be connected directly to the camera and cannot be used with other extensions or selfie sticks. Adjust to any angle The double ball mount design allows for maximum adjustability. A firm seal The strong suction cup is ideal for a firm mount on a smooth and flat surface such as glass. Tough as nails A tough and durable high strength aluminum alloy design. Easy to carry It folds up into a pocket sized package. It can be folded only for transport or short periods, not for long term storage. Dual and Triple Suction Cup Car Mount versions The Dual and Triple versions are sold by Insta360 as the Dual/Triple Suction Cup Car Mount. They give unique third person views of your car with the Insta360 Action Invisible Selfie Stick, which disappears from 360 shots. Triple suction cups form a triangular structure for maximum stability on country roads, while the dual suction cups suit city driving and flat roads. The modular design splits into double or single suction cup holders, and each suction cup has a static suction force of up to 20kg. These versions can only be used with the Action Invisible Selfie Stick. Technical Specifications Product Insta360 Suction Cup Car Mount Model (single mount) PGYTECH P-GM-132 Material (single mount) PA66+GF, TPU, aluminium Net Weight (single mount) 138g Size (single mount) 138 x 93.5 x 85mm Suction Force (Dual/Triple) Up to 20kg static suction force per cup Operating Temperature (Dual/Triple) 0°C to 40°C (32°F to 104°F) Compatibility Insta360 X6, X5, X4 Air, X4, X3, Ace Pro 2, Ace Pro, Ace, GO 3S, GO 3, GO 2, ONE RS (Twin/4K), ONE X2, ONE R, ONE X, ONE; Dual/Triple also GO Ultra In the Box Suction Cup Car Mount: 1 x Suction Cup Car Mount Dual or Triple Suction Cup Car Mount, Standard: the dual or triple suction cup set with bars and clamps, as shown in the kit image With Action Invisible Selfie Stick: the same set together with an Action Invisible Selfie Stick Available Configurations Suction Cup Car Mount Dual Suction Cup Car Mount, Standard Dual Suction Cup Car Mount, With Action Invisible Selfie Stick Triple Suction Cup Car Mount, Standard Triple Suction Cup Car Mount, With Action Invisible Selfie Stick Frequently Asked Questions Can I use a selfie stick with the single Suction Cup Car Mount? No. The single mount must be connected directly to the camera. For selfie stick shots, choose a Dual or Triple version with the Action Invisible Selfie Stick. Can I use the Dual/Triple mount on public roads? Insta360 does not recommend it on public roads. Make sure the surrounding road environment is safe and use only the Action Invisible Selfie Stick. Where should I install the suction cup? Install it on a smooth, flat surface such as glass.

    Price on WhatsApp

  • Insta360 Floating Surfboard Mount Price in Pakistan - Lens Ground

    Insta360 Insta360 Floating Surfboard Mount

    Insta360 Floating Surfboard Mount Key Specifications Mount designed for surfing to unlock the best angles Floatable and sink proof to keep your camera safe if it gets knocked off Stable 3M Dual Lock Reclosable Fastener design for extra protection Strong 3M adhesive base with superior water resistance and long lasting durability Compatibility: Insta360 X6, X5, X4 Air, X4, X3, GO Ultra, GO 3S, GO 3, GO 2, Ace Pro 2, Ace Pro, Ace, ONE RS, ONE X2, ONE R and ONE X Product Description The Insta360 Floating Surfboard Mount lets you ride the waves and capture it all. The X4 Vertical Horizontal Mount and Quick Release Mount are sold separately; make sure the Quick Release Mount is installed correctly before use. Go with the flow The floatable and sink proof design means you can ride the waves knowing your camera is safe, even if it gets knocked off. Double locked An ultra strong 3M Dual Lock Reclosable Fastener keeps it securely in place and is easy to attach and remove. Made for the long haul A high strength, water resistant 3M adhesive base that can handle a wipeout. Usage notes The Sticky Base is highly adhesive and cannot be reapplied once removed, so simply leave it on the board after surfing. To remove it, soften the adhesive with a hair dryer and peel it from the edge; never use sharp objects. With GO 3 or GO 3S, use the GO 3/GO 3S Vertical and Horizontal Action Mount Set, not the Quick Release Mount, and fit the Dive Case first if you use the Action Pod. These are sold separately. Technical Specifications Product Floating Surfboard Mount Buoyancy Floatable, sink proof Fastener 3M Dual Lock Reclosable Fastener Base Water resistant 3M adhesive Sticky Base (single use) Storage Temperature -10 to 60°C Compatibility Insta360 X6, X5, X4 Air, X4, X3, GO Ultra, GO 3S, GO 3, GO 2, Ace Pro 2, Ace Pro, Ace, ONE RS (Twin/4K), ONE X2, ONE R, ONE X In the Box Floating Surfboard Mount: 1 x Floating Surfboard Mount with Sticky Base Floating Surfboard Mount Sticky Base: 1 x Sticky Base Available Configurations Floating Surfboard Mount Floating Surfboard Mount Sticky Base Frequently Asked Questions Will my camera sink if it gets knocked off? No. The mount is floatable and sink proof. Can I reuse the Sticky Base? No. The Sticky Base cannot be reapplied after removal. A replacement Sticky Base is available as a separate option. Are the camera mounts included? No. The X4 Vertical Horizontal Mount, Quick Release Mount and GO 3/GO 3S mounts are sold separately.

    Price on WhatsApp

  • Insta360 Motorcycle Magic Arm Price in Pakistan - Lens Ground

    Insta360 Insta360 Motorcycle Magic Arm

    Insta360 Motorcycle Magic Arm Key Specifications Official Insta360 product name: Motorcycle Magic Arm Robust mount for handlebars on most mainstream motorcycles, including sport and naked bikes Full 360 degree rotation to shoot every perspective of your ride Fits 13 to 19mm hollow handlebars with replaceable plugs Fits threaded handlebars with 8mm, 10mm or 12mm holes Universal interface for Insta360 X, Ace and GO Series cameras Compatibility: Insta360 X6, X5, X4 Air, X4, X3, Ace Pro 2, Ace Pro, Ace, GO Ultra, GO 3S, GO 3 and more Product Description The Insta360 Motorcycle Magic Arm is a robust, reliable handlebar mount that unlocks limitless riding perspectives. It supports the handlebars of most mainstream motorcycles, including sport and naked bikes, and securely holds your Insta360 X, Ace or GO Series camera. Capture every angle of your ride Adjust the angle with a full 360 degree rotation. Lean into turns, shift gears or hit the brakes and never miss a moment of the action. Ride steady, shoot steady Expansion inserts secure it firmly to the handlebar, withstanding bumps and shakes to keep your shots steady. Easy on, easy off Remove the arm after your ride and leave the base in place as your end plug. A smarter setup that saves time every ride. Every rider's essential companion Compatible with most motorcycle handlebars: hollow handlebars with removable end plugs (inner diameter 13 to 19mm) and handlebars with threaded holes (thread diameter 8mm, 10mm or 12mm). Safety notes Attach a 360 camera directly to the arm without an adapter, and do not use the arm with selfie sticks, helmet mounts or other extensions. Do not extend the arm or mount the camera outside the motorcycle's frame. Use it only on paved roads or tracks, not for off road riding, and check that it is tight whenever you stop. Always follow local laws and regulations. Technical Specifications Product Name Motorcycle Magic Arm Brand Insta360 Product Type Motorcycle Handlebar Mount Rotation 360 degrees Hollow Handlebars Inner diameter 13 to 19mm, with removable end plugs Threaded Handlebars 8mm-1.25, 10mm-1.25, 10mm-1.5, 12mm-1.25 or 12mm-1.5 threads Mounting Interface Universal Insta360 interface Use Paved roads and tracks only Compatibility Insta360 X6, X5, X4 Air, X4, X3, ONE X2, ONE RS, ONE R, ONE X, ONE, Ace Pro 2, Ace Pro, Ace, GO Ultra, GO 3S, GO 3, GO 2 In the Box 1 x Insta360 Motorcycle Magic Arm Replaceable handlebar plugs and screw adapters Available Configurations Motorcycle Magic Arm Frequently Asked Questions Which handlebars does it fit? Hollow handlebars with removable end plugs and an inner diameter of 13 to 19mm, and handlebars with 8mm, 10mm or 12mm threaded holes. Which cameras can I mount? Insta360 X, Ace and GO Series cameras, including X6, X5, X4 Air, Ace Pro 2 and GO Ultra. Can I use it with a selfie stick? No. Insta360 advises against using it with selfie sticks, helmet mounts or other extensions, and 360 cameras should attach directly without an adapter.

    Price on WhatsApp


You have seen 48 out of 50 products

Insta360 GO 2 Accessories Price in Pakistan

Shop official Insta360 GO 2 Accessories in Pakistan at Lens Ground: Insta360 mounts, selfie sticks and tripods, kits and protection and carry gear made for the Insta360 GO 2 or officially listed by Insta360 as compatible with it. The price list on this page always shows the accessories we have right now. Where a price is shown, you can order directly on our website with delivery across Pakistan. If an accessory shows no price, message us on WhatsApp for today's Insta360 GO 2 Accessories price and stock.

100% genuineOriginal products from leading brands
Free delivery all over PakistanUsually 3 to 5 working days
Easy paymentCash on Delivery, credit/debit card, bank transfer, JazzCash and Easypaisa
Retail storePlot # 28-C, 3rd Floor, Office # 8, Shangani Edifice, South Park Avenue, Phase 2 Ext., DHA, Karachi

Buying Insta360 GO 2 Accessories in Pakistan

  • Models with a price on our website can be ordered directly online. After you order, our team will call or WhatsApp you to confirm the exact model and price.
  • For models without a price, message us directly on WhatsApp. There is no need to place an order on the website for these models.

Which Insta360 GO 2 accessory should you buy?

Insta360 GO 2 Accessories at a glance

Accessory Best for
Insta360 Helmet Chin Mount 2.0 Mounting
Insta360 Mini 2 in 1 Tripod Selfie stick, grip or tripod shots
Insta360 Bike Kit Complete activity kit
Insta360 Chest Strap Protection and carrying
Insta360 Back Bar Mounting
Insta360 Mini 2 in 1 Tripod 2.0 Selfie stick, grip or tripod shots
Insta360 Motorcycle Kit Complete activity kit
Insta360 Head Strap Protection and carrying

Buying Insta360 GO 2 Accessories in Pakistan

  • Accessories with a price on our website can be ordered directly online. After you order, our team will call or WhatsApp you to confirm the exact item and price before delivery.
  • For accessories without a price, message us directly on WhatsApp. There is no need to place an order on the website for these items.

Related collections

Frequently asked questions

What is the price of Insta360 GO 2 Accessories in Pakistan?

Prices can change with stock and the exchange rate. Models with a price can be ordered directly on our website, and our team will call or WhatsApp you to confirm your order. For models without a price, message us on WhatsApp at +92 300 2506005 for today's price.

Do these accessories fit the Insta360 GO 2?

Yes. Every accessory in this collection is made for the Insta360 GO 2 or names it in its official Insta360 compatibility list. Some mounts need an extra Insta360 mount or adapter for this camera; the note on the product page says which. The Compatibility row on each product page shows the full list of cameras it fits.

Is the Insta360 GO 2 still sold?

Insta360 no longer sells the GO 2. Its newer versions are the Insta360 GO 3S and the GO Ultra.

Do you deliver Insta360 GO 2 Accessories all over Pakistan?

Yes. Free delivery all over Pakistan. In-stock orders usually arrive within 3 to 5 working days after order confirmation. See our Shipping Policy.

Which payment methods can I use?

Cash on Delivery, credit/debit card, bank transfer, JazzCash and Easypaisa.

Are the products genuine and do they have a warranty?

Every product sold by Lens Ground is 100% genuine. Warranty depends on the product and is confirmed with your order. See our Warranty Terms.

© 2026 Lens Ground