Description
GoPro Media Mod for MISSION 1 Series
Key Specifications
- Media Mod for GoPro MISSION 1 PRO, MISSION 1 and MISSION 1 PRO ILS
- Multi-pattern 3-mic array with beamforming: 8 pickup modes
- 32-bit float audio recording from the built-in or an external mic
- Two 3.5mm mic/line-in inputs plus a 3.5mm headphone in/out
- Linear Timecode (LTC) input for multi-camera sync
- Micro-HDMI output up to 4K60
- 3-in-1 mounting: magnetic latch, folding fingers and 1/4"-20
- Weather-resistant; not waterproof
Product Description
GoPro Media Mod for MISSION 1 Series turns your MISSION 1 Series camera into a compact production studio for pro vlogging and live streaming, with a multi-pattern microphone, three audio ports and a 4K60 HDMI output.
Multi-pattern microphone
The built-in 3-mic array uses beamforming to offer eight pickup modes: Cardioid, Rear Cardioid, Bidirectional, Omnidirectional, Focused Stereo, Natural Stereo, Immersive Stereo and Variable Stereo. A removable windscreen is included.
Three audio ports
Two 3.5mm inputs take external mics, line-in or timecode, and a 3.5mm in/out port gives low-latency headphone monitoring. Multi-track capture records up to three audio streams in one video file.
32-bit float and timecode
Record 32-bit float audio from the built-in or an external mic, and sync multiple cameras with industry-standard LTC generators.
4K60 HDMI output
The micro-HDMI port sends up to 4K60 video to external monitors, recorders and broadcast systems.
Mount it your way
Magnetic latch mounting, folding fingers and a 1/4"-20 thread are built in, and you can reach the battery and SD card without removing the camera.
Technical Specifications
| Brand |
GoPro |
| Model |
Media Mod (AGFMD-001) |
| Compatible Cameras |
MISSION 1 PRO, MISSION 1, MISSION 1 PRO ILS |
| Microphone |
3-mic array with beamforming, 8 pickup patterns |
| Audio |
32-bit float; multi-track up to 3 streams |
| Ports |
2 × 3.5mm mic/line-in (LTC), 1 × 3.5mm audio in/out, micro-HDMI |
| Video Output |
Up to 4K60 over HDMI |
| Mounting |
Magnetic latch, folding fingers, 1/4"-20 |
| Weather Resistance |
Weather-resistant; not waterproof |
| Warranty |
Backed by GoPro's Limited Lifetime Warranty |
In the Box
- Media Mod × 1
- Windscreen × 1
Available Configurations
- GoPro Media Mod for MISSION 1 Series (single configuration)
Frequently asked questions
Does it fit HERO cameras?
No. This Media Mod is made for MISSION 1 PRO, MISSION 1 and MISSION 1 PRO ILS.
Can I use it under water?
No. It is weather-resistant but not waterproof.
Can I add a light?
Yes. The GoPro Light Mod 2 attaches via the Media Mod.
Is the GoPro Media Mod for MISSION 1 Series at Lens Ground genuine?
Yes. Every product sold by Lens Ground is 100% genuine.
